View Full Version : Wtf Is This
birdman24
12-15-2007, 03:15 AM
ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50 53 30 32 20 44 73 68 38 30 32 10
CAM Type: ROMS02 Dsh802
CAM Not Supported
THIS IS THE CARD THAT WAS IN THE STREAM...AND NOW I GO TO CHANGE KEYS AND THIS IS WHAT I GOT WHEN I TRIED TO RUN N2EDIT!!!:confused:
HAS ANYONE SEEN THIS BEFORE?
birdman24
12-15-2007, 03:19 AM
Btw It Was A Rom102 Rev103 Card
greektycoon
12-15-2007, 03:39 AM
someone switch your card maybe someone was over. and look on the back left bottom should say 102 in small numbers.if not then it is not a rom 102.
birdman24
12-15-2007, 03:42 AM
yea i was trippin by brother switched out my card!!! lol emai malakas!!lol
birdman24
12-15-2007, 03:44 AM
but now i have an issue with gendt08...i used the patch to create a dt08 on my virgin bin and now its locked after i wrote to my card.....does anyone know what the password is on that patch or where to find it?
greektycoon
12-15-2007, 03:45 AM
yea i was trippin by brother switched out my card!!! lol emai malakas!!lol ya malaka drink too much ozo . yasou muniee lmfao
birdman24
12-15-2007, 03:48 AM
den gamiese lew egw!!! lol no but really does anyone have any ideas on how to unlock?
greektycoon
12-15-2007, 03:57 AM
1. did you apply a blocker patch. if so try aabbccddaabbccdd . the backdoor key is in the blocker patch.
greektycoon
12-15-2007, 03:58 AM
gdto8 dont lock cards.
greektycoon
12-15-2007, 04:02 AM
open n2edit click tools . unlock card punch in the password
birdman24
12-15-2007, 04:08 AM
this is the patch i used to create a dt08 on my virgin card. i saved it and wrote it and now it says locked
; GenDT08-SK Patch for Rom 102
; To be use with BLOCKER V16/V22
; TO USE SK OR DT08
; BACKDOOR PAASWORD/ LOCK to 102
; USE N2EDIT BETA 7 OR HIGHER on cams
; USE N2EDIT BETA 7 ON 0801 CAMS, NOT BETA 5
; OR YOU WILL LOOP YOUR CAM!!
;
; THIS PATCH IS For
; 0001 rev 103 and
; 0801 rev 240 bev
;
; Lock Card
$821E106
; PASSWORD
$826080000000000000000
; CMD 220108 SEND ALL 000000000 SK SETUP
; MSB 08
$923B106
; CMD 08
$923C=78DF8CEF84120C2F0063D2A649849561
$924C=2A9C21F21A9391BC4DF5D201083EEBE6
$925C=AEA4D906F93746FC69662CC5B7E738FE
$926C=4119CB7C663C869A242D38E2CA6C5501
$927C=0379BC02E64ADC030000000000000000
; CMD 2B byteflopped P $0220 RAM
$9290=
$92A0=
; CMD 2B byteflopped Q $0260 RAM
$92B0=
$92C0=
; ird #forward XXXXXXXX
$A71740167CA5F
; ird #backward XXXXXXXX
$A72345FCA6701
; Boxkey XXXXXXXXXXXXXXXX
;$ --- Removed by GenDT08, not found on cam image.
; Camid XXXXXXXX
$30D84040EE4D7
$A75A4040EE4D7
$A76C4040EE4D7
; Boot Strap XXXXXXXX
$A727431344142
; Build Config XXXXXXXX
$A72B443434541
; FW Revision XXXXXXXX
$A72F450333230
; Zip Code
$A71D40001738E
; Time zone XX
$A70E1E1
; Black out string
$A772=00000000000000000000000000000000
; OD Data type for PQ
;$ --- Removed by GenDT08, not found on cam image.
;$ --- Removed by GenDT08, not found on cam image.
; OA Data type with DT08
$AC33=0678DF8CEF84120C2F0063D2A6498495
$AC43=612A9C21F21A9391BC4DF5D201083EEB
$AC53=E6AEA4D906F93746FC69662CC5B7E738
$AC63=FE4119CB7C663C869A242D38E2CA6C55
$AC739010379BC02E64ADC03
; Idea Key 86:
$AB45=C3AE5716029ED0005F24B1E99CD3EADC
; Idea Key 96:
;$ --- Removed by GenDT08, not found on cam image.
; END
greektycoon
12-15-2007, 04:21 AM
8000000000000000 or 0000000000000000
greektycoon
12-15-2007, 04:24 AM
; Password
$8260 80000000000000000
greektycoon
12-15-2007, 04:31 AM
8260800000000000 ........ dose it say unknown provider in n2 edit
birdman24
12-15-2007, 04:52 AM
no it says dish network....btw that password doesnt work. both of them
petershotkum
12-15-2007, 05:09 AM
do you have the bin u wrote to your card?
birdman24
12-15-2007, 05:11 AM
Here Is The Link Of The Bin That I Wrote To My Card. If Anyone Has Time To Take A Look At It That Would Be Cool...
petershotkum
12-15-2007, 05:14 AM
it wont let me get it
birdman24
12-15-2007, 05:20 AM
..........
Your card is now locked. You have to reglitch it with rev103 script. GenDT08 always creates card image with lock byte="06" locked. If you did not change it to "03" before you wrote it to your card it's locked. Stupid feature of getDT08.
birdman24
12-15-2007, 05:28 AM
yea i saw that but thought nothing of it...where can i get that script. is it the one that comes with the nagra master?
Nagramaster should be OK. Or search for any rev103-105 script in the files section.
tomndel
12-15-2007, 05:55 AM
i got locked out of mine one time using gendt08.had it on 06( LOCKED)instead of 03(unlocked) i used the glitcher in nagra master in pop in less then a min.if you used a clean image like a rev. 103 or a 240 it should open fairly easy
Texas Trophy
12-15-2007, 09:02 AM
; PASSWORD
$826080000000000000000
That's your password.
birdman24
12-17-2007, 10:28 PM
; PASSWORD
$826080000000000000000
That's your password.
ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50 31 30 32 20 52 65 76 31 30 33 64
CAM Type: ROM102 Rev103
Provider: Dish Network
Reading Card Image...
Failed to read card.
Unlocking Card...
Unlock Failed!
birdman24
12-17-2007, 10:47 PM
nevermind, glitched it open!!! :)
vBulletin® v3.8.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.