[06] IDEA keys ecm emm+

[flex342]

hello all please i am looking for some :confused: clearification i had a working bin on a 102 with private info on a plastic card any how befor the 106 key change it was working but after when i program it all i get is all channels are black and the keys are correct but i get only 3 [06] IDEA keys ecm emm+ . in Romexplorer and that is where 101 key2 is to go i gues my question is how do i add that line to my BIN file. thanks all....

[jacktha1]

well what blocker are you using. post that and someone might be able to help you, most of the time it is just a patch you have to add

[flex342]

here is the blocker that i am using

[YME]

Update the keys in your bin with the 0106 key updater. Clean the image back to rev 103, patch your blocker to the updated image and then patch the 12-13 patch to that image. Write that image to your card and watch TV.

[flex342]

Update the keys in your bin with the 0106 key updater. Clean the image back to rev 103, patch your blocker to the updated image and then patch the 12-13 patch to that image. Write that image to your card and watch TV.

thanks for the update, but i did do that and got the same result but i have not tested the 106 key updater on rev 103 i'll updater if any progress thanks again..

[flex342]

thanks for the update, but i did do that and got the same result but i have not tested the 106 key updater on rev 103 i'll updater if any progress thanks again..

Any how i try to update with 106 key changer but still only 3 [06] IDEA keys ecm emm+ the 4th is still missing help please some one:confused:

[jacktha1]

i believe there is a proggi out there that will update the keys for you look in the files section.

[dssftp4me]

hey flex,

I think your problem is your bn102 file. Your bn102 file needs to have the two [06] IDEA keys ecm emm+ mixed in with the [06] IDEA keys ecm emm BEFORE you apply the Provider_Keys_Patch like in TT’s sticky EMM$9F Patching How-To thread (Step 1). The "Provider_Keys_Patch” adds ONLY the 2 [06] IDEA keys ecm emm+ in the DataSpace [Empty Block… area as TT’s pic shows.

You can:

1) get another bn102 file to start with, one that already has 2 [06] IDEA keys ecm emm+ mixed in with the [06] IDEA keys ecm emm.

2) run DT-TierWorks v27 on your existing bn102 file that has only 1 [06] IDEA keys ecm emm+ in it (before you apply the Provider_Keys_Patch). Make sure the “Save And Write Keys” has been clicked in DT-TierWorks. You can get to this by clicking on the picture of a key. Then click the Modify Bin File button and select your bn102 file with only 1 [06] IDEA keys ecm emm+. This will add the second [06] IDEA keys ecm emm+ and any other info you entered in DT-TierWorks. Now you can patch the Provider_Keys_Patch to the bn102 file modified by DT-TierWorks and you should have 4 [06] IDEA keys ecm emm+.

I’m sure there are other ways to get the 4 [06] IDEA keys ecm emm+. I’m not sure it will get you what you ultimately want... Also please understand this information is for learning only and should never be used break any laws.

peace

[flex342]

hey flex,

I think your problem is your bn102 file. Your bn102 file needs to have the two [06] IDEA keys ecm emm+ mixed in with the [06] IDEA keys ecm emm BEFORE you apply the Provider_Keys_Patch like in TT’s sticky EMM$9F Patching How-To thread (Step 1). The "Provider_Keys_Patch” adds ONLY the 2 [06] IDEA keys ecm emm+ in the DataSpace [Empty Block… area as TT’s pic shows.

You can:

1) get another bn102 file to start with, one that already has 2 [06] IDEA keys ecm emm+ mixed in with the [06] IDEA keys ecm emm.

2) run DT-TierWorks v27 on your existing bn102 file that has only 1 [06] IDEA keys ecm emm+ in it (before you apply the Provider_Keys_Patch). Make sure the “Save And Write Keys” has been clicked in DT-TierWorks. You can get to this by clicking on the picture of a key. Then click the Modify Bin File button and select your bn102 file with only 1 [06] IDEA keys ecm emm+. This will add the second [06] IDEA keys ecm emm+ and any other info you entered in DT-TierWorks. Now you can patch the Provider_Keys_Patch to the bn102 file modified by DT-TierWorks and you should have 4 [06] IDEA keys ecm emm+.

I’m sure there are other ways to get the 4 [06] IDEA keys ecm emm+. I’m not sure it will get you what you ultimately want... Also please understand this information is for learning only and should never be used break any laws.

peace

Thank you dssftp4me your info worrked thank you so much:D