rom102 rev000

[amarjit99]

locked out of rom102 rev10c
i was writing new bin and it never complete writing, it still atr
and now it gives
rom102 rev 000
unknown provider

is my card toast or fixable
any response is good response

[petershotkum]

have u tried to write a virgen bin to it?

[old school]

Had a card just like that...threw everything, including the kitchen sink at it, lost cause. Does your atr end something like this?: 000000017.

[skinerd]

Rebelsurf's Omniunlocker3A has saved a couple for me, might give it a shot.

[amarjit99]

yes i tried to write virgin bin, can not write and can not read the card
and it ends with 0017

[amarjit99]

i am thinking of buying powersync unlocker.
would that be good choice and what chip
i am new to this, how would i know powersync is good one if i am buying from dealer, what should i look for

[blao]

i am thinking of buying powersync unlocker.
would that be good choice and what chip
i am new to this, how would i know powersync is good one if i am buying from dealer, what should i look for

i dont know if is a good one, but is the only one it open cards for me;)

[amarjit99]

can anybody tell me the step and setting to unlock with powersync

[Tasey]

Rebelsurf's Omniunlocker3A has saved a couple for me, might give it a shot.Yes. Had a rev 000 today that would crash n2edit or nagraedit(forget which) on card reset with a rich script error. Ran Omni3a and popped in minutes. Did a reset in Nagraedit and no atr. My heart stopped until I noticed I hadn't taken my card out of the glitcher and put it into the iso. Lol. Wrote virgin bin.:)

[amarjit99]

Omni3a, can u tell me where i can get this file and i had same rich script error with nagraedit 5.2. but i force write clean image with nagramaster 4.0, i found from other site,did not work, i hope that did not ruin my card
can somebody please help me to find omni3a script or email me procedure at ajaswal@gmail.com thanks in advance

[ice9393]

I had a card that did the same thing there is a script that will fix it so dont panic. The answer is at rom10x site. Just type in atr 0017 in search box and you will find it. I would help but ever since they went private I cant get in. sorry. I will look on my other computer for the script tomorrow , it really works just read the instructions.

[amarjit99]

thanks ice9393, i am not member of rom10x either
please let me know whenever u could, thx

[Twostep]

I'm reading this...

Use a Nexus 4619 unlocker (sold here), set at 220 ohms, dip 4 switch (only) on, 300 mA power supply. Use the 3A version of Rebel's Omniunlocker. Once you get in the card, put it in an ISO, open N2Edit and immediately write a virgin bin to it. Don't try to read it, reset ATR, etc...just write the bin right off the bat.

I've never tried this so I can't confirm if it works. Information is direct from the 10X site. If it fucks up your card blame Snags. :D

[skinerd]

I'm reading this...

Use a Nexus 4619 unlocker (sold here), set at 220 ohms, dip 4 switch (only) on, 300 mA power supply. Use the 3A version of Rebel's Omniunlocker. Once you get in the card, put it in an ISO, open N2Edit and immediately write a virgin bin to it. Don't try to read it, reset ATR, etc...just write the bin right off the bat.

I've never tried this so I can't confirm if it works. Information is direct from the 10X site. If it fucks up your card blame Snags. :D


Well N2Edit 2.58 does both reset the ATR and read the card when writing a bin, so I can't see where doing either would hurt anything.

[amarjit99]

successfully unlocked with Rebelsurf's Omniunlocker3A in less than 10 minute and write virgin image
thanks guys

[old school]

successfully unlocked with Rebelsurf's Omniunlocker3A in less than 10 minute and write virgin image
thanks guys

What the hell!!!!! You got that card to glitch open? I've never even read where anyone has opened one of these types...atr ending in 00000017. I've tried everything to get back in to mine. I've had no success. I'll give Omni 3A a try and post back.

[old school]

Well shut my mouth wide open!!! I've been sitting on this card for about a year thinking it was dead in the water. Used Omni V3A, let it run over night and,

RX Data : 2C 06
RX Data : 12 00 04 84 00 90
TX Data : 13 03 15 60 0A 21 00 07 A0 FF 00 00 02 48 00 33
0E 02 85 00
RX Data : 13 06
RX Data : 12 40 02 69 00 39 !!!!!!!
TX Data : A1

******* Good response received! *********
69
===========================================
69 was hit at: Delay:03C8 VCC:23 GlitchType:06
Elapsed: 08:26:22
VCC Resolution: 0.5
Delay Range: 03C0 to 0420

********************************
* 102 CAM NOW OPEN!! *
* WRITE A VIRGIN IMAGE TO CARD *
* PROCEED AS NORMAL *
* GOOD LUCK! :-) *
********************************

Couldn't believe my eyes.:eek:
Thanks for the help here guys!

[old school]

WOW! This omniunlocker V3A must have slipped right by me, when it came out. I just popped another card open, I had given up on. Now I've got more cards than I need. Well, always better to have extras than not. No you can't have one! :p

[Tasey]

Never give up:D Just stumbled upon 3 virgin rom 102 cards that I threw over a year ago because of no atr. Well all perkies now:p