post your rom 103 glitch resluts here

[cantalope]

Just like the tiltle says folks; for rom 102 there is a seperate thread. Lets try to keep this thread only to glitch success posts so that it doesn't get too messy. I mean't for this to be a good reference thread for the guys are glitching cards and want to see what settings have worked for others. Anyhow hope this thread works....happy glitching:)

[Tasey]

Let the 103 Glitching continue....
LETS TRY NEW DELAY
Glitch Delay = 133D
VCC = 15

------------------
TX Data : A1
===========================================
Glitch Success!! A0FF-INTERCEPT IS ON
BootLoader 6F 00 RSP Received!!
VCC = 14 (~0.386588235294138 vdc)
Glitch Delay = 133D
Glitch type 07
===========================================
Script C:\WINDOWS\TEMP\103 unlocker.xvb Transmission Completed
Let the 103 Glitching continue....
LETS TRY NEW DELAY
Glitch Delay = 1341
VCC = 06

-----------------
TX Data : A1
===========================================
Glitch Success!! A0FF-INTERCEPT IS ON
BootLoader 6F 00 RSP Received!!
VCC = 04 (~8.36078431372656E-02 vdc)
Glitch Delay = 1341
Glitch type 07
===========================================
Script C:\WINDOWS\Desktop\103 unlocker.xvb Transmission Completed
Initial Parameters = Delay:03C0 VCC:28 Glitch Type:06
-------------------------------------------------------------------- Rst17 !!!!!!!
******* Good response received! *********
69
===========================================
69 was hit at: Delay:03C0 VCC:17 GlitchType:06
Elapsed: 00:00:05
VCC Resolution: 0.25
Delay Range: 03C0 to 0420
********************************
* 103 CAM NOW OPEN!! *
* WRITE A VIRGIN IMAGE TO CARD *
* PROCEED AS NORMAL *
* GOOD LUCK! :-) *
********************************
Script C:\WINDOWS\Desktop\RebelSelf Rom103 OmniUnlocker D FubarATR.xvb Transmission Completed
Well this was a virgin Icam out of a 9200. 3c2 I believe. Went unknown provider first try but could read and write to it so kept on going. Had it on an old dish card. Drank to much and accidently clicked on a 102 script and now no atr lol. Well maybe. Gotta check the wiring.:D

[hairyballs520]

Buffer Intercept Installed. Trying to Open the 103.... Delay:03C6 VCC:08 Glitch Type:06
Elapsed = 00:00:41
---- Rst06---------------------------- Rst20------------------------------------------- Rst0C !!!!!!!
******* Good response received! *********
69
===========================================
69 was hit at: Delay:03C6 VCC:0C GlitchType:09
Elapsed: 00:00:50
VCC Resolution: 0.5
Delay Range: 03C0 to 0420
********************************
* 103 CAM NOW OPEN!! *
* WRITE A VIRGIN IMAGE TO CARD *
* PROCEED AS NORMAL *
* GOOD LUCK! :-) *
********************************





Script C:\Documents and Settings\Compaq_Owner\Desktop\103 PACKET\Rom103_Omniunlocker\RebelSerf Rom103 OmniUnlocker_D_FubarATR.xvb Transmission Completed
Let the 103 Glitching continue....
LETS TRY NEW DELAY
Glitch Delay = 0341
VCC = 27

===========================================
Glitch Success!! A0FF-INTERCEPT IS ON
BootLoader 6F 00 RSP Received!!
VCC = 1A (~0.504901960784314 vdc)
Glitch Delay = 0341
Glitch type 07
===========================================
Script C:\Documents and Settings\Compaq_Owner\Desktop\dishnet\Evilroms interceptor 103\Evilroms interceptor 103.xvb Transmission Completed




Let the 103 Glitching continue....
LETS TRY NEW DELAY
Glitch Delay = 033B
VCC = 24

===========================================
Glitch Success!! A0FF-INTERCEPT IS ON
BootLoader 6F 00 RSP Received!!
VCC = 0E (~0.264705882352941 vdc)
Glitch Delay = 033B
Glitch type 06
===========================================
Script C:\Documents and Settings\Compaq_Owner\Desktop\rar files\Evilroms interceptor 103\Evilroms interceptor 103.xvb Transmission Completed



All these panties were taken off using a MIK N2,12 v power supply ,0.34ohms (20k) scale
GOOD LUCK !!!!! REmember VERY important KEEP ur Wires short as possible 2inch or less if u can

[cantalope]

what type of unlocker, power supply are you guys using; also what are your script settings and pot setting?

[cantalope]

103 (icam) 3C0
******* Good response received! *********
69
===========================================
69 was hit at: Delay:03C2 VCC:08 GlitchType:09
Elapsed: 00:00:44
VCC Resolution: 0.25
Delay Range: 03C0 to 0420
********************************
* 103 CAM NOW OPEN!! *
* WRITE A VIRGIN IMAGE TO CARD *
* PROCEED AS NORMAL *
* GOOD LUCK! :-) *
********************************

dish 30b
Let the 103 Glitching continue....
LETS TRY NEW DELAY
Glitch Delay = 133B
VCC = 27

-----------------
TX Data : A1
===========================================
Glitch Success!! A0FF-INTERCEPT IS ON
BootLoader 6F 00 RSP Received!!
VCC = 26 (~0.74207843137255 vdc)
Glitch Delay = 133B
Glitch type 07
===========================================

don't know about the last one; still won't read or write; probably a marked card....