Patch not working for me

[DaisyMay]

Here's what I've done:
I have ROM102 w 301.010.
Applied provider key,muah, and emm$patches to Dec13aio.bin in that order.
Applied updated EMM$9F patches from sticky thread.
Applied keys key0: 3F6F1FFE1B523EF829D821DA80680C86 key1: 36C5BF328EF365E8B4626D36DC8E8551

Saved image.
One step clean, then clean codespace 5X
Loaded unmodified Dec13aio bin to card.
One step clean then clean codespace 5X.
Load modified Dec13aiobin.
Get 005 nag, all channels.
I suspect my trouble lies with the 106 keys, but I don't have any idea where to go about changing them.
Any help would be greatly appreciated.
Thank you,
Daisy

[jacktha1]

key 0 has changed u need to update it I posted it in the keys forum

[fubr]

Here's what I've done:
I have ROM102 w 301.010.
Applied provider key,muah, and emm$patches to Dec13aio.bin in that order.
Applied updated EMM$9F patches from sticky thread.
Applied keys key0: 3F6F1FFE1B523EF829D821DA80680C86 key1: 36C5BF328EF365E8B4626D36DC8E8551

Saved image.
One step clean, then clean codespace 5X
Loaded unmodified Dec13aio bin to card.
One step clean then clean codespace 5X.
Load modified Dec13aiobin.
Get 005 nag, all channels.
I suspect my trouble lies with the 106 keys, but I don't have any idea where to go about changing them.
Any help would be greatly appreciated.
Thank you,
DaisyI am not sure why you say saved bin.......then one step clean.
if you built that bin using the steps you hav in first paragraph why are you cleaning all that hard work off of it.

I am guessing your blocker is built in the aio you speak of?
you need to check your keys they changed and check the 0106 keys, there is a program called 0106keychanger you can use to get and apply all the keys you need.
Maybe I am reading you wrong but seems like you are over doing it... I know cleaning codesapce 5 times is way over kill but wont hurt :)

[fubr]

ok I see. jacktha1 is right

Use djkeygrabber to update the keys to the dec13modified bin.
if that dontr work use the 0106 keyhanger to update them on the same bin.

it will rename the file to dec13DJ.bin for the updated keys

[vietlong2005]

i use the key changer to add all keys in. got all channel except for 300s & ppv.

what im doing wrong???

[fubr]

sounds like you need an up to date blocker?

[DaisyMay]

"I am not sure why you say saved bin.......then one step clean.
if you built that bin using the steps you hav in first paragraph why are you cleaning all that hard work off of it."[/I]
I was assuming that when I did one step clean I was cleaning the card, the clean codespace on the card -- is that right ?
Also, I can't find this elusive 0106 KeyChanger.
Previous help much appreciated.
Thanks in advance,
D

[vietlong2005]

im using ROM103 REV38C blocker & emm$9F's
if there's a new up to date blocker for rom103, can u give me the name so i can look it up and download dont see any in download :(

[fubr]

http://bellexpress.vu/forum/local_links.php?action=jump&id=975&catid=47 is key changer

You want to clean codespace yes, but after you edit you bin and made all the changes you gonna make, there is no need to clean it again, you save it
thne you write the entire bin to you card,
YOU MUST BE SURE you got a blocker and that you KNOW your password to get back in.


vietlong I am not sure, but your missing something if 300's and ppv is not up.

[vietlong2005]

i still havent figure it out yet, but thank you so much for a fast reply & help
hopefully i will get it up and runing soon.

[fubr]

sorry, I dont chime in on rom threads very much, dude looped one one time claims I told him to do something I dont tell him to do..
My point is I am not a sharp as some of these guys are on blockers. I do my own and never use public ones,
somebody will help.

DVD keeps a AIO updated pretty good if you wanna try it,
He dint write it but he does a damn good job keeping it up to date I have to give hm that. It is a combination of three different bins he combined.

[DaisyMay]

I will try that, thank you, gentlemen.
D

[DaisyMay]

I give up -- when the keys rolled again, I get nothing; 005 nag. Waited 30 mins, no change.
I guess I'm just going to have to stick with my Atmega 128.
Thanks anyway.

[jacktha1]

ah come on dont give up, if the keys changed and they didnt roll all you gotta do is update the keys, if you wanna good blocker and have it easy go with Romcode, I do it fast and easy, I used to use public blockers but I found it alot easy to use romcode, as even my family can do it when im not home.

[DaisyMay]

Does that give you HBO, PPV, etc ? Where do I get it from ?
I hope that question doesn't break the rules.

[DaisyMay]

OK, based your encouragement, I have done this, and still no HBO/PPV
- Downloaded DVD's AIO bin updated 12222007 from the files section
- Applied provider keys patch
- Applied muah blocker patch
- Applied EMM$ patch
opened 0106 key grabber and applied keys
save image as 12232007
clean codespace 3X
open image 12232007
write to card
put in machine, no PPV HBO
AAAAAAAAAAGGGGGGGGGGGGHHHHHHHHHHHHH!!!!!!!!!!!!!!!

[Dave411]

I don`t use AIO`s, but not sure why you would apply the keys patch, muah blocker patch and EMM patch. It would seem that those have already been added to the 12/22 updated AIO. I would simply apply DVD`s AIO as it is except to make sure the 0101 keys are correct. The 0106 keys will roll anyway as long as the blocker passes emm42 and the keys are on the bin, so don`t worry about updating 0106 keys. Good luck

[DaisyMay]

I've done as you suggested, Dave. And I still have no PPV/HBO. No CNN on channel 200, and assorted others are gone.
I just don't know what to do.
thank you for your suggestions, they are appreciated.
I'm still trying !

[Dave411]

If you just tried it, might take a few minutes to roll 0106 keys. If you have tried it for 15 minutes and still no PPV, then you either don`t have the correct latest emm9f or you don`t have the 0106 keys on the bin. Can you double check?

[adastra]

have you looked at your bin in romexplorer? look for the keys and see how many you have. the key adder is only to be used once.

[DaisyMay]

I left it for 2 hrs still nothing.
I cehcked in ROM Explorer and and have [06] IDEA keys emm+ at line $A94A and at line $A9AA, as well as [06]IDEA keys emm+ at lines $B44D and $B46D. The first two are the 0101 keys and the second group match the numbers for the 0106 keys.
Now the keys have changed again and I have 005 nag on all channels.
I'll keep trying, but this is getting really frustrating.
Thank you boys.

[cf283]

Any luck yet DM? If you want pm me and i will send you the bin that i am using

[DaisyMay]

no luck yet; I've sent a PM, but I don't know if it went through