Am i an idiot

[dave525]

I have been trying to get my 301.013 working for 5 days now and no luck, i have followed every guide, all the information available and all i get is black channels. I have used fubr bin, almost every bin in the download section. Enigma and atmega bins and nothing. I have an enigma and usb atmega 256 and i cant get either to work. I get the few channels that show up no matter what and i see the 6 preview channels on dish home channel 100 but every other channel is black. Im running out of ideas and was hoping someone can send me in the right direction or give me some tips/ hints. I have 2 301.013 and cant get either to work. Firmware is up to p346 on both and i use the update keys.

[Bandit5906]

Why not give a little more info like what you have done, JTAG, vid mod, etc.

[dave525]

I have jtagged both of them, used every available bin, the one has a jtag adapter. I put my ird info in, verify it in atmega 3.06. I get my ird hex and box key info from my tsop dumps. If there is something you can do with the bin file i have done it. I know its probably something very simple im missing but i have tried everything.

[Imars99]

USB atmega works best with Public numbers and use enigma bin.Leave the box 10min running before you try PPV or any Channel it takes sometime to autoroll.

[c7320]

I was having the exact problem. Tried 3.0.7 this morning using public info and voila its up all channels including HD. I had to wait about 10 minutes like stated in the post above. Wait 10 minutes, the screen will still be black but as soon as you change a channel it comes alive..

Dont do the tier thing in the readme it just screws it up. All I did was Pick my IRD, Choose Bev, detect, erase 3 times, WriteAVR, then wrote this bin immediatly after. No dicking around with tiers..

eepBevdoct24dec.bn102. You can find this where FAB5 lives or go to where the proggy comes from Its in White BOLD letters when you lauch USBAtmega256.exe


c7320

[dave525]

well im using public numbers, i left the receiver on last night and my keys auto rolled but still no picture. The only thing i change on the bins is put in my ird number thats all. i really think im doing everything right. open usb atmega, select my ird, click detect, click erase, click program avr, write bin eeprom, read keys and verify they are current, read ird and cam info, change ird to my ird, click write, put it in my receiver and all the guide is white, no picture. The keys roll, i just get the 6 preview channels on dish home, and the "free channels". Any chance that both of my receivers are just messed up and wont work? or is there something im missing. If atmega or my jtag adapter was messed up the keys would not autoroll as far as i know.

[Lanny]

I have the same problem as you dave25, only with six 301.013 ird. They all worked until 3.03. After running 3.03, came up as usual then froze for about 30 min. When i changed the channel all went black screen. Each of the other 5 cards did the same thing. Keys roll, guide works,channel 101 and 213 work.
All irds use j-tag adaptor,with same bin that worked before.Have programmed on 4 different computers with dark angel,enigma,mr.teir.All come up normal except for black screen. Anybody got any ideas?

[Lanny]

I have the same problem as you dave25, only with six 301.013 ird. They all worked until 3.03. After running 3.03, came up as usual then froze for about 30 min. When i changed the channel all went black screen. Each of the other 5 cards did the same thing. Keys roll, guide works,channel 101 and 213 work.
All irds use j-tag adaptor,with same bin that worked before.Have programmed on 4 different computers with dark angel,enigma,mr.teir.All come up normal except for black screen. Anybody got any ideas?

[dave525]

After 5 days of being pissed off ready to throw it out of the window i finally vidmodded one of the receivers and put a public no rsa eeprom on it and used fubrs bin, and got all the channels up. Now im just having a hell of a time trying to get my locals