dealer ,streamlocked card

[jgkelly]

need help with a card.i have one card working with rc.im trying to get the other card working also.i cant get it to write with rc.it says dealer streamlocked.any help please.the card is unlocked.i tried programming it with cod3sp4c3 as a backup any help please.

[skinerd]

Have you tried omniunlocker 3A on it?? Prolly just blocker locked and that unlocking script may get you back in.

[retiredguy]

try using N2edit and clean codespace and see if that helps

[skinerd]

try using N2edit and clean codespace and see if that helps If the card is locked, how do you propose he do that??

Gotta get it unlocked first........

[retiredguy]

need help with a card.i have one card working with rc.im trying to get the other card working also.i cant get it to write with rc.it says dealer streamlocked.any help please.the card is unlocked.i tried programming it with cod3sp4c3 as a backup any help please.

Mainly because he said the card is unlocked. And if he unlocked it and didnt clean the codespace it will still show as Rev10c and the app will think it is streamlocked until it has been cleaned back to Rev 103.

[skinerd]

Mainly because he said the card is unlocked. And if he unlocked it and didnt clean the codespace it will still show as Rev10c and the app will think it is streamlocked until it has been cleaned back to Rev 103.

The way I read the post is the card, at one time, was unlocked, but now it has a blocker of some sort on it causing it to be reported as locked.

[retiredguy]

when you unlock the codespace blocker it does just that. it unlocks it, but you still have to clean the codespace for it to get to Rev 103 so it will be accepted by the RC app.

[skinerd]

After reading it again, I am not sure what his problem, he does say it is unlocked, so if that is the case, you are correct, all he needs to do is read the card with n2edit , and clean codespace and write it back to rev 103.

[retiredguy]

I feel sure that is what the problem is. Im just curious why you went to all of the steps involved to call me out before reading the post again. I came here to help with the RC support because I have read at alot of forums where folks were complaining about the non support of romcode so I felt like I could be of some help since I do know the app very well. I came here and joined and started helping as much as I could and it seems that a few of you always seem to try to find some little something wrong with my posts. if you want to do the support without my help, thats fine. But I would suggest many more things to do before I suggested anyone to glitch their card and take the chance of looping it. I just expect more professional behavior from a mod of this site than the registered user.

[Bandit5906]

So there! Guys calm down a little: it is not an ego trip but just TV!

[retiredguy]

Im very calm Bandit, just curious is all.

[gwc]

i feel like an idiot but how do you do this :::::and write it back to rev 103. from the messages above we are haveing the same problem and are lost. When we put the card in rc we are getting the dealer/streamlock message when we and it is now 10c.

we we go to xp atmell and try to flash card it error to can't find atmel

[retiredguy]

After reading it again, I am not sure what his problem, he does say it is unlocked, so if that is the case, you are correct, all he needs to do is read the card with n2edit , and clean codespace and write it back to rev 103.

So if you have not unlocked it, unlock it and follow skinerd's directions

[Bandit5906]

i feel like an idiot but how do you do this :::::and write it back to rev 103. from the messages above we are haveing the same problem and are lost. When we put the card in rc we are getting the dealer/streamlock message when we and it is now 10c.

we we go to xp atmell and try to flash card it error to can't find atmel

sometimes it is just a communication problem with the ISO so pull the card and wipe the contacts and try again.

[gwc]

We tried during the rc being down to set up a back up and used the C0d3spa4c3. we were never able to achieve anything with that process, after all said and done we ended up with a card that was a 102 rev 103 card that was fine in rom code to a card that now is a 102 rev 10c and dealer/streamlocked. we have no image of the card (computer crash and dumped) we had grow use to rom code and had not tried anything for a whillle

just tried what you suggested cleaned card etc and even put a business card on top of it still failed.

do we even need to go through this process.

would like to just get back to usefullness and be able to use rom code, we have a subscription for back up but like the testing side

any help would be appreciated

[retiredguy]

try reading the card in N2edit and copy and paste the results please and someone here will take at look at it and maybe see a problem.

Have you clicked the key in N2edit or Nagraedit and tried the unlock password that you used or was in the blocker? if so try that and if it says card unlocked successfully, then clean codespace, then write to card

[skinerd]

I feel sure that is what the problem is. Im just curious why you went to all of the steps involved to call me out before reading the post again. I came here to help with the RC support because I have read at alot of forums where folks were complaining about the non support of romcode so I felt like I could be of some help since I do know the app very well. I came here and joined and started helping as much as I could and it seems that a few of you always seem to try to find some little something wrong with my posts. if you want to do the support without my help, thats fine. But I would suggest many more things to do before I suggested anyone to glitch their card and take the chance of looping it. I just expect more professional behavior from a mod of this site than the registered user.

I was not calling anyone out. I am somewhat familiar with RC also.
It just seemed to me that although he stated his card was unlocked, that it really was not, may have been, but now is not.
I assumed he tried to read and clean the card, maybe he didn't.
I have seen many cards blocker locked that had to be reglitched open for whatever reason. IE forgotten passwords, bad writes, etc......

[skinerd]

We tried during the rc being down to set up a back up and used the C0d3spa4c3. we were never able to achieve anything with that process, after all said and done we ended up with a card that was a 102 rev 103 card that was fine in rom code to a card that now is a 102 rev 10c and dealer/streamlocked. we have no image of the card (computer crash and dumped) we had grow use to rom code and had not tried anything for a whillle

just tried what you suggested cleaned card etc and even put a business card on top of it still failed.

do we even need to go through this process.

would like to just get back to usefullness and be able to use rom code, we have a subscription for back up but like the testing side

any help would be appreciated


Now that seems to me to be blocker locked, and will most likely need regiltched, but it won't glitch as a 10c, as it is prolly only spoofed to 10c.

I suggest you try omniunlocker3A and see if it gets you back in.

[retiredguy]

But to help this person you felt the need to quote my reply and ask ME a question rather than suggesting something else. maybe im thin skinned but I took it as calling me out since you posed your question directly to me.

[tessa8940]

if it is dealer or streamed locked should he not try a hard unlock by typing unlock in default unlock code?

[retiredguy]

GWC, you staed that you cleaned the card, what did you use to clean it. If its streamlocked you woulod not be able to clean the card, it would say failed to read. if you are using N2edit , try clicking on programs and scripts and click ons step clean and see if that works.

[retiredguy]

if it is dealer or streamed locked should he not try a hard unlock by typing unlock in default unlock code?

Most definitely before he tries to glitch back into it.

[skinerd]

if it is dealer or streamed locked should he not try a hard unlock by typing unlock in default unlock code?


There again, I was assuming he tried that......but maybe he didn't.
Seems like a guy would try all he could before asking for help, but maybe he didn't.

But, I agree if that has not been tried, it definately should be, before glitching.

[gwc]

this is what i got when i read card in niagra edit:

Opening of COM4 was successful
ATR String: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50
31 30 32 20 52 65 76 31 30 43 14
ROM Revision: 102
EEPROM Revision: Rev10C
Error, unsupported card type
Closing of COM4 was successful

again any help will be appreciated

[skinerd]

i feel like an idiot but how do you do this :::::and write it back to rev 103. from the messages above we are haveing the same problem and are lost. When we put the card in rc we are getting the dealer/streamlock message when we and it is now 10c.

we we go to xp atmell and try to flash card it error to can't find atmel

I hope you are not trying to flash an ISO........lol.......

If it is an unlocker that you are trying to flash, then the enable flash switch must be on, depends on which unlocker you have as to which switch is the flash enable switch.

[gwc]

this is what i got when i read card in niagra edit:

Opening of COM4 was successful
ATR String: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50
31 30 32 20 52 65 76 31 30 43 14
ROM Revision: 102
EEPROM Revision: Rev10C
Error, unsupported card type
Closing of COM4 was successful

again any help will be appreciated

[skinerd]

Get N2Edit 2.58 and try again. It supports rom 102 rev 10C.

And I hope you meant NagraEdit 5.2, and NOT 4.0........cause 4.0 is not N2 compatible.

[retiredguy]

this is what i got when i read card in niagra edit:

Opening of COM4 was successful
ATR String: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50
31 30 32 20 52 65 76 31 30 43 14
ROM Revision: 102
EEPROM Revision: Rev10C
Error, unsupported card type
Closing of COM4 was successful

again any help will be appreciated

Please use N2edit as it is the same as the programmer in RomCode. try this open N2edit, click reset atr.....click tools.....click unlock card......a password box will pop up..paste this..DEADBEEFBAADF00D in there and click unlock card. If it says unlocked successfully, then click tools....one step clean...then program card in RC. First though when you applied the codespace blocker did you change the password or use the one included. I posted the unlock code in the blocker, so if you changed, use your password and follow the same steps and let us know

[gwc]

If its streamlocked you woulod not be able to clean the card, it would say failed to read. if you are using N2edit , try clicking on programs and scripts and click ons step clean and see if that works.

i had done all of the above but this, here is the results of that step.....

ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50 31 30 32 20 52 65 76 31 30 43 14 CAM Type: ROM102 Rev10C
Provider: Dish Network
Reading Card Image...
Failed to read card.
Failed to Read Card on line 1

[retiredguy]

Please use N2edit as it is the same as the programmer in RomCode. try this open N2edit, click reset atr.....click tools.....click unlock card......a password box will pop up..paste this..DEADBEEFBAADF00D in there and click unlock card. If it says unlocked successfully, then click tools....one step clean...then program card in RC. First though when you applied the codespace blocker did you change the password or use the one included. I posted the unlock code in the blocker, so if you changed, use your password and follow the same steps and let us know

have yopu tried this

[gwc]

did this ....Please use N2edit as it is the same as the programmer in RomCode. try this open N2edit, click reset atr.....click tools.....click unlock card......a password box will pop up..paste this..DEADBEEFBAADF00D in there and click unlock card. If it says unlocked successfully, then click tools....one step clean...then program card in RC. First though when you applied the codespace blocker did you change the password or use the one included. I posted the unlock code in the blocker, so if you changed, use your password and follow the same steps and let us know

with the password we change to we cog unlcocking card, unlock failed.

went back and used DEADBEEFBAADFOOD and we get an exception error and ask if we want to continue, detail on error are LONG, we continue and it says unlocking card.....and does not finish......
THANKS for all the help you guys are giving trying to resolve this issue, we comb the forums and always appreciate the help provided........

[retiredguy]

When you use DEADBEEFBAADFOOD you are using zeroes instead of the letter o right.
DEADBEEFBAADF zero zero D

if this dont work you will need to glitch

[gwc]

tried again with zeros finished but said unlock failed. we will try glitching will have to drag box out, and load everything, have not had to glitch or anything in a while, and not since computer wiped out. ....will have to download everything.

thank you all for your help....may be back for more if i cant remember how to get it all going agian.......

thanks again......i will keep checking back to see if anything else pops up

[skinerd]

If its streamlocked you woulod not be able to clean the card, it would say failed to read. if you are using N2edit , try clicking on programs and scripts and click ons step clean and see if that works.

i had done all of the above but this, here is the results of that step.....

ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50 31 30 32 20 52 65 76 31 30 43 14 CAM Type: ROM102 Rev10C
Provider: Dish Network
Reading Card Image...
Failed to read card.
Failed to Read Card on line 1


That proves it's locked, that's all. Try the passwork retiredguy gave you, the default codespace password, unless you changed it on yours.
Lookin the bin you wrote last the password will be in there.

[jgkelly]

I Got It Solved.it Was Locked By A Backdoor Blocker.my Unlocker Would Not Take The Password In N2edit.i Had To Use My Usb Programmer For It To Accept The Password To Unlock It.thanks For All The Help

[retiredguy]

well we thought you were using your iso programmer the entire time, glad you got it bud