PGM - for ST19XL 2.24.08 (CEMU) floppy disk maker

[smilingjack]

PGM - for ST19XL (CEMU) floppy disk maker

--------------------------------------------------------------------------------

PGM- for CEMU S19XL 2.24.08




workes for me CEMU

Sj

http://bellexpress.vu/forum/local_links.php?catid=64

[sledmanjones]

Sorry jack,but CEMU and ST19xl are two completly different programs,maybe you could edit the CEMU part out .Maybe call them by their right names,CEMU Floppy Disc Maker, and ST19xl Floppy Disc Maker,to avoid confused newbies...

[JT]

Yes, SJ, please label the files appropriately. Your referring to st19xl as cemu a lot lately. Cemu programs use a dish.bin from a rom10 8kb in size. ST19xl uses a st19.cor file from a rom102 18kb in size. Very big difference there and they both will run from a boot floppy. There is no real difference on the users end, but they are very different forms of emu.

[smilingjack]

This work for both cards ST19 & CEMU
It doesn't need a AUX or 102
IT was labels defiantly "The fix for CEMU" posted by slasher
I up up-graded it from 17 to 19 and tried it for for 2 hours in my CEMU
(Yes it uses a COR file)
(2 chip cemu, 10bar.hex, public numbers) The same one I use to get the keys
.
.
My coder have taught me how to compile, make a "floppy disk maker" for the members here.
Only here can you get that service.
I have posted the simple way to get you locals in both ways
**************************
The new programs will be easier to get
the 1 zip contain the new files (complied) (just paste them in)
The 2 zip contains the whole new program (un-complied)
And there will be a "floppy disk maker " too for every program
They will be lable (PGM - ( for the coder) for ST19XL (for the use) (CEMU) floppy disk maker
.
1. Just make a floppy
2. Just follow the guide to get You locals

[sledmanjones]

Huh?

[smilingjack]

This work on both CEMU and ST19 (without a card)

[zhakrin]

This work on both CEMU and ST19 (without a card)

This statement makes no sense, the difference between CEMU and ST19 is software, not hardware.

[smilingjack]

Yes, but PGM ST19XL 2.24.08 software works on CEMU
ST19 is just a CEMU with a ISO and a rom 102 attached

[johnnyjam]

Yes, but PGM ST19XL 2.24.08 software works on CEMU
ST19 is just a CEMU with a ISO and a rom 102 attached

HUH?

Do you mean that the floppy creator will work for both, right? Because Cemu ("C" - EMU) Is a C+ based rom 10 emulator which currently works off of a rom10-102 bin. Yes, it also has a 102 eeprom image that it uses, but it is not the same as st19xl...

St19XL is PGM's own emulator, which emulates the ST19 processor used on rom 102-103 cards. Unless MAP calls are invoked, this software is designed to completely emulate a rom102, and even takes the stream updates for the .cor file. Of course, the Maprom is a completely separate processor on rom cards, and so when map calls are used, the routines must either be simulated with a proggy like auxshare, or run on an Auxed 102 card in an iso programmer.

Could you please clarify your post a bit more..

Thanks

...clockspeed...

[midgetcoach]

What the H*LL are you talking about? This is confusing. Are you saying there is a new ST19 out. All mine(ST19 D*SH and B*V) are up and working fine.

[Tasey]

HUH?

Do you mean that the floppy creator will work for both, right? Because Cemu ("C" - EMU) Is a C+ based rom 10 emulator which currently works off of a rom10-102 bin. Yes, it also has a 102 eeprom image that it uses, but it is not the same as st19xl...

St19XL is PGM's own emulator, which emulates the ST19 processor used on rom 102-103 cards. Unless MAP calls are invoked, this software is designed to completely emulate a rom102, and even takes the stream updates for the .cor file. Of course, the Maprom is a completely separate processor on rom cards, and so when map calls are used, the routines must either be simulated with a proggy like auxshare, or run on an Auxed 102 card in an iso programmer.

Could you please clarify your post a bit more..

Thanks

...clockspeed...Has anyone tried dropping their 10to102 dish bin into this puppy? lol I could take cemu and code it for a perfect SO emulator and call it TaseySO! but it would still be cemu. I think BigJack just started his own emulator line!:D

[smilingjack]

It is PGM
I don't write them, I just copy them (Thats enough for me)
The original was posted here by slasher
PGM- for CEMU S19XL 2.24.08
I just added the up-date from 18 to 19
and made a floppy disk maker

[Scoobydooo]

Yes, but PGM ST19XL 2.24.08 software works on CEMU
ST19 is just a CEMU with a ISO and a rom 102 attached

Huh? :confused:

That is like saying Linux works on Windows.

Cemu is software. ST19 is Software.

Maybe you are trying to say...

>>> This ST19 bootdisc will work on an emulation computer that was running Cemu.

Scoob

[smilingjack]

I don't know, I NOT a coder
.
this went though PGM, slasher, and I don't know who else.
.
I have a 2 chip CEMU, 10bar.hex
And the "boot disk" it runs on mine.
.
I just copy them, I don't write them
And If they run, I say so
.
If they don't run, I say that too. or untested

(On this one, I took slasher boot disk "18" and added the "19" fix)