Phoenix Atmega Loader v2.2.

[bellhater]

confirmed working unknown if freezing still going on, but at least we have tv for now enjoy!

(http://www.sendspace.com/file/bpe1xo)

[satsatsat]

Getting card not inserted properly after about 5 minutes. Anyone got this?

[SEARCHY4]

can you post the mem 40 that you got after it rolled. mines not rolling. just go to mem patch and click get then post it

thanks

[PEARL]

takes alittle time to roll,........... be patient but works perfect

[ellsmako]

takes alittle time to roll,........... be patient but works perfect

about 4 -5 min , just enough time to dent a 2 4
once again thank Phoenix team

301.13 508 301.10 charles public

[mofotec]

my 4900 charles rolled in at 15-min.

[cloudten]

I"m getting a 019 error any ideas??

[Pyotr]

Getting card not inserted properly after about 5 minutes. Anyone got this?

I got that message when using default speed of 3.68mhz in PAL.What is your clock speed setting in PAL? Should be 4.50(4.608 is better) for 18.432 mhz Atmega. Or 1/4 you crystal speed.

[SEARCHY4]

been 2 hours.someone post the mem it would realy help.

[accesshu]

been 2 hours.someone post the mem it would realy help.
MECM40

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

[SEARCHY4]

THATS WEIRD. puleed the mem from it.so it rolled but still black.kinda like when the keys change. dont get it same mem posted above.

i see public is working

who's working on private?

[kya100]

been havin the same problems posted above which is a first for me i've never had problems with phoenix what's up [dish 2800 128,256 leag.] 019 nag & black screen, runnin 128 256 for bev[2700,3100] perfect

[Praxis]

THATS WEIRD. puleed the mem from it.so it rolled but still black.kinda like when the keys change. dont get it same mem posted above.

i see public is working

who's working on private?

Private working fine here. Reload your card & try again. First time I programmed it I was receiving error 19. Then I re-downloaded the file/programmed and all is well.

[argonne]

Running great here for dn norsa. Using 2800s with 128s and legacy256s. Iso clock for 128s set at 4.50 and legacy256s iso clock at 4.608. No mecm's added, streamed in about 15 minutes.

Here a little info on iso speeds. Not my work. c/p

* * * BEST ISO CLOCK SETTINGs * * *
__________________________________________
BEST
Crystal ISO Clock
Speed Setting Baud Error
------------------------------------------
16.000 MHz 4.00 = 0.00 %
18.000 MHz 4.50 = 0.00 %
18.432 MHz 4.608 = 0.00 %
24.000 MHz 4.00 = 0.00 %

[SEARCHY4]

reproged 20 times
never had this much trouble before. tryed every clock speed. dont get it. tryed in other rec and nothing but err 19.

[WyldCherry]

just did mine and took off no problems

[SEARCHY4]

i take it this no longer has rom 103 support.

[SEARCHY4]

i have the rom 103 for 128 flash working.i will upload it

[moose1138]

I have atmeag 128 using pal 2.2 with 2700 on bell no freezing since new fix running great.

[dizmatic2001]

i have the rom 103 for 128 flash working.i will upload it
Have u uploaded the 103 flash yet just wondering been trying for awhile to get it to work?

[mk14er]

reproged 20 times
never had this much trouble before. tryed every clock speed. dont get it. tryed in other rec and nothing but err 19.


DELETE dwmme.tmp IN EEPROM FOLDER

REPROGRAM USING 4.50

[SEARCHY4]

yes i will upload it.