Stubborn 10C

[stlteman]

I have a rom102 rev10c that will not budge! Using RM1A with powersync. I have tried 2.2K ohms down to 150 ohms with no luck. Have used 7.5v to 9v on all the resistance settings. Its ran for 2 hrs to 20 hrs and still not luck. Tried switch 1 only and switch 2 only on all the above settings. Been trying for about a week. Ive unlocked several 10C cards using 200 ohms, 9v and RM1A with the powersync, all between 13 - 45 minutes.

Anyone have one like this? I will try about anything right now.

Im completely out of ideas on this one.

[Wiley-X]

Some 10B's and some 10C's are like that....I have a few that just refuse to pop or loop.

[gobtool]

If you can change the start delay to a lower value (or high value to a higher value) that may help. That's what I had to do to unlock a 109.

[soundsource]

Now, this statement upon initial reading is going to sound stupid, but I will explain.........I have found that a 10b or 10c is either going to loop , open , or that vast majority.......nothing at all..................my point.......somnething we have not seen at any other rev.......the rev has a card specific natural disposition.........I have a waide cross sample of experience with 10c and have founf that if you glithc a card the vast majority will run forever (hours, hours) and do nothing, neither loop nor open.............doesn't matter the voltage, ohm load, ect..............some.....about 1 out of three or four will open in somewhere between 30 secs and 3 hrs............and the few (thank god) loop in the first hour......................

[Wiley-X]

You're right...it sounds stupid.

I suggest you try RM-1C. You can come a little lower on the ohms....but do not go below 100 ohms.

[soundsource]

Lol, if you and I were having this conversation face to face would you respond like that? People are funny, let me see if I can be a bit more specific........past revisions would either loop or open generally rare to find one that you could glitch repeatedly without some result...............majority of current rev 102's (with nexus) can be glitched for hours/ days without looping or opening.........that was my point............thanks for your reply though probably helped many...............