Unlocked ROM102 REV 10C" / blocker

[capacho]

Hello

Please accept my apologies for asking this question here also. I also asked the same question in the other sub-forum that discuses blocker. No sure what forum should have posted this.

I purchased “The Nexus White loader” from this site. I tried to unlock a "ROM 102 Rev 10B" using such a loader, but I looped the card.

Then, I purchased the "Unlocked ROM102 REV 10C" card from this web
site also. I was able to flash the Nexus loader, and read the card
ROM102 REV10C without any errors, but then I played with a blocker
(I
believe the blocker was "c0d3sP4c3_-
_ROM_102_Blocker_v16.0_Hot_Fix_v08_MECM_60") and I think I changed
the
last line of this blocker script to "$3320 1 01" and I applied
such a
blocker to the card, and now the card is locked. I have tried to
unlock it using the password “aabbccddaabbccdd” either in lower
case
or in upper case with not success.

I did read some threads from your forum quite a bit for a week or
so,
but I am still confused of what I need to do in order to *re-
establish* access to my ROM102 REV 10C card.

Any information about how to fix this would be greatly
appreciated.


Thanks in advance,
Capacho

[coromi52]

Try all 0's...

[capacho]

thanks , but it didn't work. I also tried all 1's, but nothing

[SEARCHY4]

did you keep your bin that you loaded. is it still give correct atr?
just look in the bin. this is why you nevr use a UNLOCKER for writing.
you must use a iso.

[johnnyjam]

Hotfix files are just a patch for a cam that ALREADY HAS the FULL codespace blocker applied to it. If you read a virgin 102, or a 102 with a different blocker on it, and then patched the image with the hotfix, you are most likely permanantly locked out...

So if the card already had the codespace blocker on it, and you read the image and patched it, that would be ok... BUT, if it was a virgin image, or any other flavour of blocker... the cam is probably toast...


; ------------------------------------
; ------------------------------------
; ------------------------------------
; c0d3sP4c3 - ROM 102 Blocker v16.0i/p
; Hot Fix v08 MECM 60 Post Hash Update
; Public Release Date: 2-8-2008
; ------------------------------------
; ------------------------------------
; ------------------------------------
; Application instructions: RTFM
;
; Option 1: Unlock your Rom 102 using
; c0d3sP4c3 v16.0i/p Blocker. Read
; card, test and apply this patch,
; then write card.
;
; Option 2: Follow original c0d3sP4c3
; v16.0i/p instructions then apply
; this patch last before writing to
; your card.
; ------------------------------------
; ------------------------------------
; ------------------------------------
; - MECM 60 - MECM 60 - MECM 60 -
; - MECM 60 - MECM 60 - MECM 60 -
; - MECM 60 - MECM 60 - MECM 60 -
; - MECM 60 - MECM 60 - MECM 60 -
; ------------------------------------
; 00 = Use decrypted MECM 60 (default)
; 01 = Use encrypted MECM 60 - $92D7
; ------------------------------------
$35C0 1 00 ; Enabled
; ------------------------------------
; Decrypted and/or modified MECM 60
; code. If you update this code you
; must update the encrypted code at
; address $92D7 and the corresponding
; provider 0106 Key 96 used for
; decrypting that code block. Used for
; proper RAM setup. If decrypted code
; is enabled this code will replace
; the original code @ $0100 in RAM
; before execution.
; ------------------------------------
$35D0=8A9B99B60D88A4F1B70D90AE04A659B7
$35E0=16A6FFB715121690D60BA29089A4074C
$35F0=B748A602CD3840A60BB744A6E2B7453F
$3600=48A607CD3840A60BB744A6A2B7453F48
$3610=A63BCD3840A61CCD3840A629CD3840A6
$3620=0BB744A6E2B7453F48A60BCD38401316
$3630=B6145F9097909FD80BA2D70BA25C2AF5
$3640=9085905A2A9784B70D86988700000000
$3650=00000000000000000000000000000000
$3660=00000000000000000000000000000000
$3670=00000000000000000000000000000000
$3680=00000000000000000000000000000000
$3690=00000000000000000000000000000000
$36A0=00000000000000000000000000000000
$36B0=00000000000000000000000000000000
$36C0=00000000000000000000000000000000
; ------------------------------------
; ------------------------------------
; ------------------------------------
; Patch Encrypted MECM 60 Code
; Required for RAM Init/Setup even if
; using decrypted and modified code.
; ------------------------------------
$92D7=7BC75ADDB3FE98EEF261ACE54C007503
$92E7=CC1975A05B1BDCA7F1F47C3FFDCA4DCB
$92F7=5E5B68684CFFF7F95726393A08E27581
$9307=96EDDD6C2B3BC0BF0BAB6D6381CDDDFC
$9317=C842903D166E8CC34CE878CB7DB49071
$9327=464EB691D8F60D2AA4787C4BC0363DEC
$9337=32F2355B5EBC0FF5921B48C3590FEC13
$9347=A8F5D41212E65368DECEE2DE4B8426FF
$9357=2AC60C5007592FCDC10B9FD3328C2838
$9367=3C9EE1C2171631B170F2B743C2F6C08D
$9377=8ED09644393C6CCDF364634626466494
$9387=9D2A649F6913AFC238F805CEF8673347
$9397=1EF2F8462AF4107802CE15F707485786
$93A7=C1351D3FC57F746CFD3674CBFD736ADF
$93B7=E1D6416C5E71AACA53FC2578B946541D
$93C7=DACE27EF081BB12D575D31852B1395B1
; ------------------------------------
; Provider 0106 IDEA Key for MECM 60
; ------------------------------------
!RemoveEqual 06 05 06 0106 204608 10
!ADD 06 1A 13DB 0001 0106 204608 10 7324E4C2D50C84DB173508622DA75BF8
; ------------------------------------
; - MECM 60 - MECM 60 - MECM 60 -
; - MECM 60 - MECM 60 - MECM 60 -
; - MECM 60 - MECM 60 - MECM 60 -
; - MECM 60 - MECM 60 - MECM 60 -
; ------------------------------------
; ------------------------------------
; ------------------------------------
; ------------------------------------
; If you want to lock it manually
; change the 00 below to 01 otherwise
; the blocker will lock itself
; automatically when inserted in the
; receiver.
; 00 = Unlocked - Autolock active.
; 01 = Locked - Manually Locked.
; (locked by default)
; ------------------------------------
$3320 1 01
; ------------------------------------





Option one is if you already have the full v16 blocker on your card...

Option two is if you have a virgin, or another flavour of blocker...

[rg6a]

From someone that's been there and done that...........here's my advice. Before doing anything..........go into the programme of your choice and check the Delays.

Whether serial or usb, add some.............use a default of at least 100 and possibly 4X depending on the speed of your 'puter. It may take a couple of minutes more but at least you know that your iso can handle it.

My dedicated box is an old AMD based 330 K2...........no problem (most of time). ;-)

[FredTheRed]

Are you getting a good ATR using an ISO ? Read it in N2Edit and post what it says..

[Dr Zapola]

I have the same problem with the same patch. But I put it on a good 10C file with a blocker.