phoenix atmega 2.2.5 just released.

[SEARCHY4]

testing now will report back.

[mayor]

Thankyou Will Be Wating

[SEARCHY4]

works great. woop woop. GO TEAM PAL.

[mayor]

WHERE is the file at please

[SEARCHY4]

check your pm

[mayor]

dont understand what you mean im new at this yhanks

[Pyotr]

dont understand what you mean im new at this yhanks

Look in your private message mailbox.

[greenie-monster]

dont understand what you mean im new at this yhanks

dude you have 72 posts already, how can you not know what a pm is

[alsouthster]

works great. woop woop. GO TEAM PAL.

ditto :D

[kiutie]

Hi,
Can anyone send me the file, the link in public file section seems to be dead or too busy... Can't get the file from there.
Thanks.

[hugh]

I too am looking for this file. Can someone be nice and share??
Thanks!!

[billard500]

look in the file section

[stubidass]

get it here

hXXp://rapidshare.com/files/113713797/Phoenix_Atmega_Loader_v2.2.5.rar.html (http://rapidshare.com/files/113713797/Phoenix_Atmega_Loader_v2.2.5.rar.html)

[Wiley-X]

Confirmed! Working wide open on NoRSA Keyset. Thanks Phoenix team...the plastic goes back in the drawer!

[enigma]

Working great here using DN...301.10...128. No patches, keys all zeros, and rolled in only 6 minutes.

Thanks Team P !!!

...enigma

[mofotec]

4900 d/n wide open thanks pal

[SEARCHY4]

8a9bcd5a6c05008080b60d88a4f7b70d
A602b748ad5ac60a004e44a403ae2042
Ab78c70156c60a00a41fad0d84b70dcd
5a7d0500808086988788a605b76fcd5a
C00a000a2005ac7180cd5ac0918e0a25
0bafcd5ac00178008020a6048d0084cb
Cd5ac0008001782085a681d701792008
Cc38408383838383082067083541f14a
3084260dcd80b48eb42d896feb236f93
6ddd5135f856df16b56d3939d1e6a39a
1325ca02b2a05b8b721baee3ef57f01a
C371492c65899b4e3801285ef6c0a8b0
B55449eddac23146f338101e0c312618
6de1d4bceac306d39fa22ac5f365c0d3
5d9489ef96aa443032dd81dfd420569e
Df71e6ce5a3413920000000000000000

[argonne]

Working great here norsa 128s legacy irds dn

[DaisyMay]

working since this am without a hitch - yes 102 back to rest 128 301.010

[mayor]

thanks team phoneix wide open and working great

[marcbnimble]

Working good !

[ellsmako]

Well I'll be,... Thanks Phoenix team,... loaded it this morning at 0400 without patching but key update and it is still working. Love to have know how its done so I could help ,.. oh well pass the spoon around. Yummy

[gobtool]

Mine were all freezing when I came back in, running private numbers? 301.010 and 311, any suggestions. Thanks

[mannybeef]

input new keys manually, all good again

[mardtangewala]

2.2.5 doesn't seem to be autorolling. my 128 stopped working about an hour ago, i updated the key manually and it came up instantly.

[FTA4ALLU]

It stopped working here too but went back up. Autoroll works but very slow it seems, if that long freeze was a key change....

FTA4ALLU

[micoanjo]

WHERE is the file at please Sport_Bev_May_9_AR and ATMEGA_128_FIX_for_jeepers_May_9_2008 I just put in the file section I tested both been running for 5 hours no freezing works great just passing them on happy testing ...

[gobtool]

I wonder if it's working better on older receivers? 2800 or 3800? I haven't tried those fixes above but have tried a couple others at different iso speeds 4.5, 4.6. Whatever that changes.

[mannybeef]

ird may just need to be unplugged/replugged then try
or just check switch lol
18mhz - 4.5 / 18.432 - 4.6
i dont think phoenix fixes were ever better for legacy than dp irds though.
probably other way around, more probs on legacy in past

[micoanjo]

I wonder if it's working better on older receivers? 2800 or 3800? I haven't tried those fixes above but have tried a couple others at different iso speeds 4.5, 4.6. Whatever that changes. I am running a 2700 and 3100 works great on both

[Wiley-X]

Running PAL 2.2.5 on five 501-508-510 PVRs. I haven't even noticed key changes since I loaded this morning (must be autorolling- I'm still up!). No freezes, no glitches...just clean sailing so far.

[SEARCHY4]

works great on 301 and 522 only freezez when keys need changing.

i dont know the guy but am assuming that the pfg for jeepers is the flash from pal so it will act the same. it just makes it easy for peeps that cant figure out how to work pal.

[gobtool]

Never did get the 311 working without freezing. Switched to a 301.010 with public #'s and it working fine. The other 301.010 with private info is working ok now.

[catman]

are 103's really working with the new phoenix 2.2.5 just cant get mines to work tried on 2-522's and nothing can anybody post a how they got their 103's working using private info....thanks

[mesias]

are 103's really working with the new phoenix 2.2.5 just cant get mines to work tried on 2-522's and nothing can anybody post a how they got their 103's working using private info....thanks
This is what i did to my 103.013 and it worked like a charm:
* Take the dust out of the Atmega128
* Have your 102.bn2 ready.
* Start the Phoenix program, virginize the card and erased 3 or 4 times
* Run the Wizard, select provider, tiers, PPV, etc.
* Select private keyset, load 102.bn2, set ISO Clock to 4.5
* Update the keys, enter PAL MECM40
* Write to the card, enjoy TV!

[SEARCHY4]

only tv 1 is working for the 103 on 522/625. i am taking a peek and seeing what i can cume up with. seems they did some changes to the emm handling on 103 that might be messing with it. but if you load it as normal. switch your box to single mode. after it gets signal hit the swap button and youl get tv.

[daniel.ramirez]

2.2.5 was working perfectly, now the IRD shows no video (black screen) and keeps rebooting, anyone else?

301-13 @349, atmega 128 @ 18MHz.

[Bicnelli]

exact same thing her started 20 min ago

[rgd92]

I'm getting smart card not inserted correctly...pull card, put back in, same message comes up...

[bogercitymadman]

same here 4900 atmega 128 18mhz 4.00 pm eastern