New 128 not working

[SATTROY3M]

Hello Guys. Does anybody knows why the new file for the Atmega 128 called "Sport dish may 29 " is not working properly? Am not getting any Cartoon channel and PPV are blocked. Any idea ? Thanks guys... And high five for the man,the super coder : FUB_5.. Long live the musquetters :)

[AOAOAO]

Phoenix Loader 2.2.9 is working flawless and if you need a pfg file just run it in the no card mode and make your own it's simple. Kudo's to the Phoenix Team,

[SATTROY3M]

Thanks AOAOAO...but u talking chinese with me..hehehehe..am one of those having problem runing Phonix, so i use the pfg files with jeppers. But I dont know anything about running it in "No Card Mode" or "Making my Own". Maybe something is wrong with the file? Normaly "Sport pfg. files" are very complete and never had propblem with them.. maybe they made a mistake. Long Live the Musqueteers..High 5 for Fub5 and of course "Team Phoenix" you guys Rocks ..thanks again...

[AOAOAO]

You don't have to write your card with Phoenix
Open Phoenix
hit settiings
No Card Mode
go through the program picking your tiers etc.
at the end instead of wrighting the card select
Output to PFG
and it will write one for you.
Good Luck!

[SATTROY3M]

Kool AOAOAO...so u saying that Phonix can be use as Jeppers also? that's very kool.But i have to wait till later on to download the Phoenix i dont have it anymore.But I dont know shiiitttt about picking tiers and etc.. hehehehe...InLigh me dude !!!!!! lol.. thanks btw

[AOAOAO]

Yes they added that feature a while ago to help Jeepers users out .

[SATTROY3M]

What are Tiers and wich one should i pic? Txs.... I'll be on Atmega forum in a minute.

[AOAOAO]

Run it you should be able to figure it out

[SATTROY3M]

ok.. I'll later on.. txs

[mesias]

Phoenix Loader 2.2.9 is working flawless and if you need a pfg file just run it in the no card mode and make your own it's simple. Kudo's to the Phoenix Team,

Hi there,

I tried PAL 2.2.9 without luck. All I'm getting is local channel 7. The rest of the channels are black and IRD keeps rebooting. Any suggestion?

[SATTROY3M]

kool.. nice comment messias... is good to know what is going on,that way i dont run into those problems later on... very good

[rookie8155]

It is not working me either. I am getting blank screen.

[mesias]

Does anyone have PAL 2.2.2 that could post it? In other thread i read it is working w/o MECM.

[scan]

I didn't touch the card and its back up by itself... using PAL 2.2.8 :)

[mesias]

I didn't touch the card and its back up by itself... using PAL 2.2.8 :)
For how long it's been working? No rebooting?

[mesias]

OK guys... it's working with PAL 2.2.9. Try this:
- Umplug receiver for a while
- Erase ATmega with Jeepers 3 or 4 times
- Load PAL2.2..9

My ATmega128 worked in 301.013 y following these steps.

[hacker]

Just use phoenix 2.2.2. It works flawlessly and you need to patch any MECM's. I think it's in the files section, if not I will post it.

[hacker]

What are Tiers and wich one should i pic? Txs.... I'll be on Atmega forum in a minute.The tiers are the channels. Just select what channels you want. Choose America's top 100, 200, 250 and the movie packages and you will get most of the channels. For PPV and porn, you can use this

655500 to 670000

[SATTROY3M]

Wuz up guys? Can anybody guide me to load my ATMEGA_128 with the Phoenix.2.2.9 ?
First time i try it. been using Jeeper.I been trying like for 4 hours already and I cant get it.
I did Open Phoenix-went to setting and press "No Card Mde.OK". Then to wizard."Mega 128" then "DN" then "check Mark" everything..I didnt "ADD PPV" then "No RSA DN" then "18.432 Mhz ---3.6864 (ISO) "then " Get Key" then next on "MECM"( all blank) then checkmark "Output to custom pgf file" with checkmark on "output File" and "verify writes" then Press "Make PFG". It does create a Jeeper PFG, i open it loaded to my Atmega,the it give me the error message.."CARD NOT INSERTED PROPERLY" What am doing wrong???? HELP !!!!!!!! TXS Guys

[SATTROY3M]

What About The " ISO Clock" ? do i have to leave it on 3.6864 ?
Thanks dude for helping me.

[osok]

iso should be 4.50

[SATTROY3M]

do u input 4.50 all the time osok? or it change ? is that the reason why is not working? txs

[SATTROY3M]

YEAH !!!!!!!!!!!!! I got it now..thanks OZOK.. now my question is about the 4.50.. how did u come out with that number? and what is ISO clock? txs a bunch...txs to u 2 Haker

[hacker]

Here is a list of the exact settings for each crystal:

Speed Setting Baud Error
------------------------------------------
16.000 MHz 4.00 = 0.00 %
18.000 MHz 4.50 = 0.00 %
18.432 MHz 4.608 = 0.00 %
24.000 MHz 4.00 = 0.00 %


If you used 4.50 on 18.432, it should still work ok.

[hacker]

do u input 4.50 all the time osok? or it change ? is that the reason why is not working? txsYou use the same speed all the time depending on your crystal.

[SATTROY3M]

MAN... I have learn so much today that " I FEEL GOOD ".!!!!! lalalalala...hehehehe
I almost got all the angles cover, I know the "ISO Clock", I also learn today how to get the minimum and max numbers for PPV and Porno with the windows calculator in scientist mode and getting the HEXS numbers...BUT i still dont undestand the MECM_40 and MECM_60, what do they represent,what do u use them for and how to get them or create them. That way I can create a Jeeper PFG file and post it for other people that still waiting till now for a jeeper file.While i created mine and am up and running...This Phoenix loader is evry-very-very good program...My hat goes off to "Team Phoenix" you guys are good.Long Live the Musqueteers.... MECM 40,MECM 60 ?????

[scan]

For how long it's been working? No rebooting?

PAL 2.2.8 is still up since yesterday afternoon - no problems whatsoever. And like aim saying I didn't even pulled it out of ird...

[SATTROY3M]

I think all the PAL are working...2.2.2 and 2.2.9 are fine here. No Problem. Hey anybody knows anything about MECM'S (40 and 60) ? what are they and how to create them? I 'll apreciate the Info. txs.. Long Live The Musqueteers ( Coders ) . High 5 for "Team Phoenix"

[billybobb]

PAL 2.2.8 is still up since yesterday afternoon - no problems whatsoever. And like aim saying I didn't even pulled it out of ird...

I wonder if they pulled the maps again?
can anyone confirm a rom 10 back up or any older atmega files?

thx:)

[richmari]

[Chang=SATTROY3M;496865]Wuz up guys? Can anybody guide me to load my ATMEGA_128 with the Phoenix.2.2.9 ?
First time i try it. been using Jeeper.I been trying like for 4 hours already and I cant get it.
I did Open Phoenix-went to setting and press "No Card Mde.OK". Then to wizard."Mega 128" then "DN" then "check Mark" everything..I didnt "ADD PPV" then "No RSA DN" then "18.432 Mhz ---3.6864 (ISO) "then " Get Key" then next on "MECM"( all blank) then checkmark "Output to custom pgf file" with checkmark on "output File" and "verify writes" then Press "Make PFG". It does create a Jeeper PFG, i open it loaded to my Atmega,the it give me the error message.."CARD NOT INSERTED PROPERLY" What am doing wrong???? HELP !!!!!!!! TXS Guys[/quote]

Change your ISO clock to 4.5 or 4.50...enjoy

[Proplock1]

Hi Folks, How Do I Get The New MECM's To Load Them On My 128 Or Patch Them
Is There a Link To New MECM's
Thanks Proplock1