Cemu going green

[enigmaman]

Is there any thing be done for cemu all green every 30 min. Have to reset to get going again. st19xl cant run because he only has com port two that will work. Thanks for any help. And i think when the locals remap that is when it goes green.

[smilingjack]

change you dish.bin
CEMU is running OK

[Eldune]

That is no answer! I have been asking every way possible HOW to make tiers for CEMU ROM 10. I get no answers like its a big secret. change dish bin is no good. how about locals in your market.
HT tiers and so on. I have tried so many tier programs i cant even tell you anymore. Its rom 10 just a hint would be GREAT.!! PS CEMU is running GREAT Thanks to all that make this happen, just not on the channels I would like to get.

TIA

[smilingjack]

Their is a stick I wrote have to change you locals
follow it
I post 2 dish.bin in thread one for the east cost and one for Texas start with them, they are both public Numbers

[Little Kenobe]

try this patch on a clean dish.bin
set your own local info and blackout


; BLACKOUT STRING FOR REMAP...
; Check the Local tiers and BO strings.txt for your Blackout
; Blackout String-----------||------||
$D2B8=7F7F7F7F7F7F7F7F7F7F7F2200000084
$D2C8=00000000000000000000000000000000
; TIERS EXPIRE 1864 02/04/2009
; TIERS 10 THRU 16 CAN BE USED FOR ANY MISSING CHANNEL YOU WANT.
;*********IF YOU USE TO MANY CHANNELS YOU WILL START TO LOOSE PORN/PPV/PREIMIUMS due to epg overload.
; Depending on how many Sats u have and what IRD you have you may or may not have a problem.
;--------------------------------------------------------------------------------------------------------------------
; Tier 1 0001 48FF Top 060 + E/W Networks
$D311=1EFF88000001011100000A1864000000
$D321=010013490000363800000048FF00FF00
; Tier 2 0258 02EE Top 120 + superstations
$D381=1EFF88000001011100000A1864000002
$D391=5800134900003638000002EEFF00FF00
; Tier 3 08FC - 0A82 America's Top 180
$D3F1=1EFF88000001011100000A1864000008
$D401=FC0013490000363800000A82FF00FF00
; Tier 4 00C8 01C4 Premium Movies + Fox Sports
$D461=1EFF88000001011100000A1864000000
$D471=C800134900003638000001C4FF00FF00
; Tier 5 083E 08AC Spanish Language Pack-110,119 (819-899)
$D4D1=1EFF88000001011100000A1864000008
$D4E1=3E00134900003638000008ACFF00FF00
; Tier 6 0398 03D1 ALL Muzak (Mono Audio)and CD Package
$D541=1EFF88000001011100000A1864000003
$D551=9800134900003638000003D1FF00FF00
;Tier 7 PPV/Porn Tier
$D5B1=4CFDE361000101300168D33637A8BE00
$D5C1=01003637A8BE7FFF00000001007FFFFF
$D5D1=FFFFFF0F8C0701000363000F8C06CC1D
$D5E1=5061792D70657220766965772070726F
$D5F1=6772616D01505056020F8C0001000000
; Tier 8 0334 8000 Playboy esp
$DA3D=1EFF88000001011100000A1864000003
$DA4D=340013490000363800008000FF00FF00
; Tier 9 0050 00C6 INternational Pack
$DAAD=1EFF88000001011100000A1864000000
$DABD=5000134900003638000000C6FF00FF00
; Add your tiers 1 at a time to each string below.
; You do not need to fill in every tier with a local.
; Just edit as many as you want and don’t mess with the other ones.
; TO ADD YOUR LOCALS YOU NEED TO KNOW YOUR LOCALS LO AND HI
; ADD THE 4 NUMBER OF YOUR LO TO THE LAST 2 NUNBERS IN LINE 1 AND FIRST 2 NUMBERS IN LINE 2
; ADD YOUR 4 NUMBER HI TO THE 21ST THRU 24TH NUMBERS IN LINE 2
; Buffalo is shown below as an example.
; Tier 10 (Nashville ) 18D0 18E4
;-----------------------------------||
$DB1D=1EFF88000001011100000A1864000006
$DB2D=68001349000036380000067CFF00FF00
;-----||------------------||||
;--------------------------------------------------------------------------------------------------------------------
; Tier 11 (Nashville ) 18D0 - 18E4
;-----------------------------------||
$DB8D=1EFF88000001011100000A1864000006
$DB9D=68001349000036380000067CFF00FF00
;-----||------------------||||
;--------------------------------------------------------------------------------------------------------------------
; Tier 12 ( empty local ) 0000 0000
;-----------------------------------||
$DBFD=1EFF88000001011100000A1864000000
$DC0D=000013490000363800000000FF00FF00
;-----||------------------||||
;--------------------------------------------------------------------------------------------------------------------
; Tier 13 (empty local ) 0000 0000
;-----------------------------------||
$DC6D=1EFF88000001011100000A1864000000
$DC7D=000013490000363800000000FF00FF00
;-----||------------------||||
;--------------------------------------------------------------------------------------------------------------------
; Tier 14 (empty local ) 0000 0000
;-----------------------------------||
$DCDD=1EFF88000001011100000A1864000000
$DCED=000013490000363800000000FF00FF00
;-----||------------------||||
;--------------------------------------------------------------------------------------------------------------------
; Tier 15 (empty local ) 0000 0000
;-----------------------------------||
$DD4D=1EFF88000001011100000A1864000000
$DD5D=000013490000363800000000FF00FF00
;-----||------------------||||
;--------------------------------------------------------------------------------------------------------------------
; Tier 16 (empty local ) 0000 0000
;-----------------------------------||
$DDBD=1EFF88000001011100000A1864000000
$DDCD=000013490000363800000000FF00FF00
;-----||------------------||||

[Eldune]

THANKS LK!!!!!!!!!!!!! I will try this. BUT AGAIN what are you using to make the
tiers???????????

[smilingjack]

There are two dish.bin in these threads
the both work
at least it a place to get started from

http://www.dssftp.com/forum/showthread.php?t=79191
.
http://www.dssftp.com/forum/showthread.php?t=79191

[enigmaman]

There are two dish.bin in these threads
the both work
at least it a place to get started from

http://www.dssftp.com/forum/showthread.php?t=79191
.
http://www.dssftp.com/forum/showthread.php?t=79191


Thinks will try it.

[enigmaman]

There are two dish.bin in these threads
the both work
at least it a place to get started from

http://www.dssftp.com/forum/showthread.php?t=79191
.
http://www.dssftp.com/forum/showthread.php?t=79191




Those bins has been try is there any thing else that will make it go green? Because it is still going green. On a p392 software.

[dssdude50]

may be your flash, try rewrite chip

[enigmaman]

Try new flash same thing all go green but the local still work.

[smilingjack]

Try 10bar.hex
That what I use
4900 - I using on of these dish.bin,
have been using for years, no chnage

[enigmaman]

Can any one confirm this works with the 10bar.hex because he can not get the 10bar flash with it. Is there any thing out there that you can flash a 10bar.hex with a old hu loader? Thanks for any help.

[oldtech58]

i have always used fibr16 (on a dos boot disk)
it's been very dependable. also i don't change the flash until the old one really quits working. they tend to last much longer than one would think..

[enigmaman]

He did get it to flash but get the o19 errors so he give up for now he said his coolsat 5000 works great. I want to thank all for your help.

[enigmaman]

Ok Im back flash a 2313 chip with the 10bar.hex but get 019. When flashing there is no errors dose this work with the one chip emu? Still getting green run 5 min and as soon the guide is push on the remote green guide . The st19x1-2.8.00 works great but trying like hell to get CEMU to work. Thanks for any help please. The FBRGP16 was use to flash the 2313 chip.

[willynills]

did it ever work before

[enigmaman]

did it ever work before


No that I know of.

[sumpin4me]

green guide means your tiers are expired. here is a C/P of a post that helped me with this. credit goes to the original poster.

Sounds like the tier dates have expired on your d*sh.bin.
Try this;
Open your d*sh.bin in NagraEdit 4.1
If it asks what type of bin it is, select "Rom10"
Click on" Patch"
Copy and paste the following patch into the patch window
Click "test patch"
Click "run patch"
Click "File" >>> "Save as"
and save as d*sh.bin
Paste your updated d*sh.bin into your cemu folder, overwriting the old one.

Scoob


;CEMU Auto Roll Tier and CAM Expiration Date Update Patch
;New Date = 17E9 = 10/04/2008, or replace all 17E9 with your own Date.


; Tier 1
$D31C4 17E9A8BE

; Tier 2
$D38C4 17E9A8BE

; Tier 3
$D3FC4 17E9A8BE

; Tier 4
$D46C4 17E9A8BE

; Tier 5
$D4DC4 17E9A8BE

; Tier 6
$D54C4 17E9A8BE

;Tier 7 - PPV - No Change (Set at 3637 = 12/31/2029)

; Tier 8
$DA484 17E9A8BE

; Tier 9
$DAB84 17E9A8BE

; Tier 10
$DB284 17E9A8BE

; Tier 11
$DB984 17E9A8BE

; Tier 12
$DC084 17E9A8BE

; Tier 13
$DC784 17E9A8BE

; Tier 14
$DCE84 17E9A8BE

; Tier 15
$DD584 17E9A8BE

; Tier 16
$DDC84 17E9A8BE

; Tier 17
$DE384 17E9A8BE

; Tier 18
$DEA84 17E9A8BE

; Cam Date/Time
$D0F74 17E9A8BE
$D09E4 17E9A8BE
$D7094 17E9A8BE

[smilingjack]

I don't know which CEMU you are using
but switch to 1.4.43 / 1.3.44 and use my dish.bin
I have had the same dish.bin for 5 years
never had to touch it

[boerieboy1]

Having same problem with guide going green. 301.13 single.
ST19 was working until latest ecm, also had cemu working fine a while ago.
Cemu comes up working then if change channel get "do you want to upgrade / purchase" and entire guide is green. Also seen ird reset a couple of times.

Get same thing with SJ's bin.

[SilentReaper]

Having same problem with guide going green. 301.13 single.
ST19 was working until latest ecm, also had cemu working fine a while ago.
Cemu comes up working then if change channel get "do you want to upgrade / purchase" and entire guide is green. Also seen ird reset a couple of times.

Get same thing with SJ's bin.

I just compiled cemu yesterday and that exactly whats happening with my 501, it will bot up fine and run for a little while, then reboot, then run for a little while rboot again and soon after if I change channels it will desub, and it will repeat the process if I reboot the pc.

[five9999]

http://bellexpress.vu/forum/local_links.php?action=jump&id=1438&catid=64

try this flash. I had same problem with green guide on 301-013. My old flash worked on ST19, but NOT cemu. this flash on the atmel fixed it.

[enigmaman]

Change pc and he say it work dont figure.

[boerieboy1]

http://bellexpress.vu/forum/local_links.php?action=jump&id=1438&catid=64

try this flash. I had same problem with green guide on 301-013. My old flash worked on ST19, but NOT cemu. this flash on the atmel fixed it.
Thx Five9999 - will give it a try as soon as I get a chance to download.

[justanotherjoe]

I tried that flash and my IRD wouldn't even start up. (It never progressed to acquiring signal). 10bar works. But I'm having a different problem now. The channels go green right at power up. If I then restart CEMU, the green is gone and all channels are fine.

Any thoughts on how to fix that, so that it's ok at power up?

[jskey]

Could the firmware on the receiver be part of the cause for the desub(green guide?) 3900 upgraded at P350 been asking to update for months. Is it safe to take the latest fw updates with cemu?

[boerieboy1]

Finally found a copy of 10bar.hex and reflashed.
Seemed to have same issue initially green guide and receiver reset.
Recompiled cemu with the source files posted earlier and using jacks bin with 10bar flash and has been up for a couple of hours now.

Thx SJ and everyone else for the advice. This site rulez !

[pecker88]

Another suggestion re: green guide...

When generating tiers for cemu rom10-102 bin in Mr-tierworks, extra info is included in the patch file that contains zip, timezone, ect... (see below example).

IF that information is different then what is in the cemu.ini file, you will get a green guide after a few hrs.

SO, either comment out all zip code, timezone info in the cemu.ini file using a #
OR
make sure that the zip, timezone info in BOTH the dish.bin file AND cemu.ini file are identical.



Locals patch generated from MR-tierworks for cemu rom10-102:
The red highlighted info must be IDENTICAL to the info present in the cemu.ini file.

;Tier #1 - Locals - [119*06] (94-1) Phoenix/Prescott AZ 8320-8338
$D311=1EFF8800000101110020801841A8BE05
$D321=B800134900003638A8BE05CCFF00FF00

;Tier #2- PPV/Porn Tier
$D5B1=4CFDE361000101300168D33637A8BE00
$D5C1=01003637A8BE7FFF00000001007FFFFF
$D5D1=FFFFFF0F8C0701000363000F8C06CC1D
$D5E1=5061792D70657220766965772070726F
$D5F1=6772616D01505056020F8C0001000000

; ------------------------------------
; Other Miscellaneous User Input
; ------------------------------------

; Cam Date/Time
;$D0F74 1841A8BE
;$D09E4 1841A8BE
;$D7094 1841A8BE

; Start Date/Time
;$D2A94 14822FBD

; End Date/Time
;$D2B14 3638A8BE

; Time Zone
$D0E91 E1

; Zip Code IN HEX
$D0F43 xxxxxx (xxxxxx for security)

; Blackout String
$D2B8=7F7F7F7F7F7F7F7F7F7F7F7F00000094
$D2C8=00000000000000000000000000000000