522 Ird needs to be unlock rev 380

[tyfon]

I hope Skinred can answer this one..

I have couple 522 IRd Rom 103 rev 380
the BGA still on the board
I have fallowed the instruction how to glitched
I'm using at the moment powersyn dip 2 & 5
50 ohms to 200ohms.
All I get is this -------------------------------------------
then I tried dip 3 the I get ----------------rst 01 ----------------
or some thing lika that. this will run for hours
but it won't unlock.

the setting to WINexplorer

Function setupunlocker()
Wx.BaudRate = 115200
Wx.ResetBaudRate = 115200
Wx.Parity = 0 ' 0 = None, 1 = Odd, 2 = Even, 3 = Mark, 4 = Space
Wx.StopBits = 0 ' 0 = 1 stop bit, 1 = 1.5 stop bits, 2 = 2 stop bits
Wx.DTRControl = 0 ' Initial state of DTR 0 = off, 1 = on
Wx.RTSControl = 1 ' Initial state of RTS 0 = off, 1 = on
Wx.ResetDelay = 100 ' In microseconds
Wx.ByteDelay = 10 ' In microseconds
Wx.RxByteTimeout = 3000 ' In milliseconds
Wx.ResetMode = 2 ' 0 = No Resets, 1 = ISO Reset (Expect a ATR), 2 = Device Reset (No ATR)
Wx.ResetLine = 1 ' 0 = Toggle RTS for Reset, 1 = Toggle DTR for Reset
Wx.ByteConvention = 1 ' 0 = Inverse, 1 = Direct
Wx.FlushEchoByte = 0 ' 0 = no flush, 1 = flush - A Phoenix interface will echo each byte transmitted.
Wx.FlushBeforeWrite = 1 ' 0 = no flush, 1 = flush - Flush the receive buffer before each write to strip off Null bytes.
Wx.IgnoreTimeouts = 1 ' timeout, 1 = Ignore all receive timeouts
Wx.ResetAfterTimeout = 0 ' 0 =
Wx.LogTransactions = 0 '
isplayUSW = 0 '
Wx.DisplayFuse = 0 '

I have triied EvilRom, Rommasterto to unlock it
I still get this
Buffer Intercept Installed. Trying to Open the 103.... Delay:03C5 VCC:23 Glitch Type:09
Elapsed = 00:00:22
----------------------------------------------

I also tried several unlocker and I get the same results.

So what I'm I missing?

Any help will appreciated.

Tyfon