Help Setting Up Powersync

[mountainmax]

Hey guys, just got a new Powersync to try to pop a couple of rev 248's I have streamlocked, What dip switches to i use to flash it, and what chips should I be using, it came with 2 sets, finally what should I set the pot and dip switches to while using rommaster1 to pop them??? thanks in advance........

[NICKY__6]

if you look right where the dip switch are it tells you the setting to flash

the dip settings are
Use only 1 dip switch at a time.

1- Clock at 18.4 Mhz Inverted
2- Clock at 18.4 Mhz Non-Inverted (Normal Position)
3- Clock at 9.2 Mhz Inverted
4- Clock at 9.2 Mhz Non-Inverted

Unless you have a very stubborn card then leave the number 2 switch on at all times. And 1,3 & 4 off.

5- Flash enable, on or off.


REV248 is a high rev card so you will need 4619 chips and i dont think rommaster gonna do it for you. you will need winexplorer and a newer script. and the pot adjustment will be set according to the response line in the script.