mk14er
05-24-2009, 12:58 AM
102 YELLOW CARDS OR SW-CARDS MISSING channel work around WITHOUT SPOOFING OR LOSING AUTOROLL
ENJOY THE FIGHT
JUST FYI ATMEGAS AND FTA ARE FULLY WORKING LIKE NORMAL MINUS ADULT CHANNELS
THIS WAY WORKS OR YOU CAN REPROGRAM YOUR RECIEVER TO OLDER FIRMWARE THAT WILL ALLOW IT TO WORK WITH NO NAGS BUT NEED TO LEAVE RECIEVER ON 24 HOURS A DAY SO IT DOESNT UPD8 FIRMEWARE
step 1 power on recieve
step 2 turn on channel 122
step 3 wait for a show to come on PRESS OK IF IT ASK
step 4 press menu on remote
step 5 press 7 on remote for timers
step 6 press down arrow on remote twice so create is highlighted
IF IT ASK TO SET UP VCR JUST CLICK YES TO SETUP AND ADD 111 AS CODE
THEN GO BACK TO CREATING TIMER
step 7 press ok
step 8 press 168 on remote
step 9 press ok so spike - 168 is checkmarked
step 10 press left arrow on remote so vcr is highlighted
step 11 press down arrow on remote 5 times untill daily is highlighted
step 12 press ok ON REMOTE to checkmark
(vcr and daily should be checkmarked)
step 13 press right arrow 2 times ON REMOTE so set date time is highlighted
step 14 press ok ON REMOTE
IF IT ASK TO SET UP VCR JUST CLICK YES TO SETUP AND ADD 111 AS CODE
THEN GO BACK TO CREATING TIMER
step 15 press left arrow on remote so start time is highlighted
step 16 check current time (example current time is 10:10 am) now add 5 minutes to current time (example current time plus 5 minutes would be 10:15 am)
step 17 press those numbers on remote to enter into start time (example 1015)if 2-9 oclock add 0 at front like 0820 for 8:20
step 18 press up or down arrow to highlight am or pm and press ok on remote
step 19 press down arrow on remote so end time am or pm is highlighted and select the same as you selected for start time
step 20 press left arrow on remote so end time is highlighted
step 21 press same time as start time minus 1 minute (example start time was 10:15 so enter in 10:14 1014
step 22 press right arrow on remote so create timer is highlighted
step 23 press ok on remote
IF IT ASK TO SET UP VCR JUST CLICK YES TO SETUP AND ADD 111 AS CODE
THEN GO BACK TO CREATING TIMER
step 24 press cancel on remote untill out of menu , should now be back on channel 122
step 25 wait 5 minutes untill timer kicks in channel should change to channel 168
(ok channel is now on channel 168 and will turn there everyday at the same time dont worry you can change channel to what ever you want)
(timer is on 24 hours a day minus 1 minute)
step 26 press the channel number you want to see
(YOU SHOULD SEE TO VIEW THIS CHANNEL MESSAGE DONT WORRY ABOUT IT)
STEP 27 PRESS GUIDE ON REMOTE AND THEN CANCEL
OK MISSING CHANNEL SHOULD BE IN
WANT TO WATCH ANOTHER MISSING CHANNEL PRESS CHANNEL NUMBER ON REMOTE ,THEN GUIDE,THEN CANCEL
THE CHANNEL WILL CONTINUE TO WORK UNTILL YOU CHANGE CHANNEL
YOU CAN ALSO JUST PUSH UP OR DOWN ON REMOTE FOR THE NEXT CHANNEL ,THEN GUIDE AND CANCEL(THIS WAY DOES NOT SHOW YOU WHAT CHANNEL YOU ARE ON)
ALL CHANNELS WORKING EXCEPT ADULT ON 119 AND 110
ENJOY THE FIGHT
JUST FYI ATMEGAS AND FTA ARE FULLY WORKING LIKE NORMAL MINUS ADULT CHANNELS
THIS WAY WORKS OR YOU CAN REPROGRAM YOUR RECIEVER TO OLDER FIRMWARE THAT WILL ALLOW IT TO WORK WITH NO NAGS BUT NEED TO LEAVE RECIEVER ON 24 HOURS A DAY SO IT DOESNT UPD8 FIRMEWARE
step 1 power on recieve
step 2 turn on channel 122
step 3 wait for a show to come on PRESS OK IF IT ASK
step 4 press menu on remote
step 5 press 7 on remote for timers
step 6 press down arrow on remote twice so create is highlighted
IF IT ASK TO SET UP VCR JUST CLICK YES TO SETUP AND ADD 111 AS CODE
THEN GO BACK TO CREATING TIMER
step 7 press ok
step 8 press 168 on remote
step 9 press ok so spike - 168 is checkmarked
step 10 press left arrow on remote so vcr is highlighted
step 11 press down arrow on remote 5 times untill daily is highlighted
step 12 press ok ON REMOTE to checkmark
(vcr and daily should be checkmarked)
step 13 press right arrow 2 times ON REMOTE so set date time is highlighted
step 14 press ok ON REMOTE
IF IT ASK TO SET UP VCR JUST CLICK YES TO SETUP AND ADD 111 AS CODE
THEN GO BACK TO CREATING TIMER
step 15 press left arrow on remote so start time is highlighted
step 16 check current time (example current time is 10:10 am) now add 5 minutes to current time (example current time plus 5 minutes would be 10:15 am)
step 17 press those numbers on remote to enter into start time (example 1015)if 2-9 oclock add 0 at front like 0820 for 8:20
step 18 press up or down arrow to highlight am or pm and press ok on remote
step 19 press down arrow on remote so end time am or pm is highlighted and select the same as you selected for start time
step 20 press left arrow on remote so end time is highlighted
step 21 press same time as start time minus 1 minute (example start time was 10:15 so enter in 10:14 1014
step 22 press right arrow on remote so create timer is highlighted
step 23 press ok on remote
IF IT ASK TO SET UP VCR JUST CLICK YES TO SETUP AND ADD 111 AS CODE
THEN GO BACK TO CREATING TIMER
step 24 press cancel on remote untill out of menu , should now be back on channel 122
step 25 wait 5 minutes untill timer kicks in channel should change to channel 168
(ok channel is now on channel 168 and will turn there everyday at the same time dont worry you can change channel to what ever you want)
(timer is on 24 hours a day minus 1 minute)
step 26 press the channel number you want to see
(YOU SHOULD SEE TO VIEW THIS CHANNEL MESSAGE DONT WORRY ABOUT IT)
STEP 27 PRESS GUIDE ON REMOTE AND THEN CANCEL
OK MISSING CHANNEL SHOULD BE IN
WANT TO WATCH ANOTHER MISSING CHANNEL PRESS CHANNEL NUMBER ON REMOTE ,THEN GUIDE,THEN CANCEL
THE CHANNEL WILL CONTINUE TO WORK UNTILL YOU CHANGE CHANNEL
YOU CAN ALSO JUST PUSH UP OR DOWN ON REMOTE FOR THE NEXT CHANNEL ,THEN GUIDE AND CANCEL(THIS WAY DOES NOT SHOW YOU WHAT CHANNEL YOU ARE ON)
ALL CHANNELS WORKING EXCEPT ADULT ON 119 AND 110