Model 1000 IRD

ouxly40 · 07-28-2003

A friend asked if i could have a look at his 1000 IRD. I have not seen it but i think it has no jtag port. is there one on the circuit board or do i have to find another route such as voltmeter method

07-28-2003

There is no jtag on 1***,prefered method for retrieving boxkeys is to remove tsop and have it read by a dealer.....my opinion is that it's not worth the time or money,better to upgrade and go and get a 31**.

07-28-2003

The 1000 are older. If the CAM is original, chances are it's a ROM2 or ROM3. The boxkeys can be read off the CAM (if it's unlocked). If it's locked, send it to a dealer to be opened, then read the boxkeys.

ouxly40 · 07-28-2003

of course the cam is locked. he already plugged it in and told me the rev #. and no i will not send it to a dealer. that is not even almost an option. no trails. besides i have plenty of open cards.

07-29-2003

Quote:

Originally posted by ouxly40
of course the cam is locked. he already plugged it in and told me the rev #. and no i will not send it to a dealer. that is not even almost an option. no trails. besides i have plenty of open cards.

Paranoid...are we?
Anyways you can still put cam in ird without the sat cable hooked up and this will tell you the rev of cam without having to worry that the cam is locked....

ouxly40 · 07-30-2003

ok guys i guess i have been unclear. I know that the card is locked. he already read me the rev # from the sys info screen. Then he told me that it was subbed until last month. At that time i told him i would not be able to get b-keys from card and would he tell me what model it is. "1000" he says. I say "well I am not certain, but i think it has no jtag port. His unit has been in the stream, subbed, for years. i just wondered if i should tell him we need to look for another IRD for him.I apologize for not being clear as to what i needed. I need to jtag it or replace it.

07-30-2003

Well let's be really clear about .
1000 you can't jtag.
Replace it is the best option for both of you,he'll be happy.
His card will most probably be at Rev A3D.Shelve it and wait.

ouxly40 · 07-30-2003

thank you for a direct answer. that;s all i wanted was to know if it was taggable without going 115 miles to see for myself. Yes another ird is the answer. again thank you

07-30-2003

NP,anytime

ViP211 modded HDTV IRD Slinger ready Free shipping SALE PRICE: $349!!!	RomCode DishTV Subscription FROM: $69.00	Slinger IKS Kit FREE SHIPPING PRICE: ONLY $199!!! CLICK HERE FOR INSTRUCTIONS	ViP622 modded HDTV IRD Slinger ready Free Canada shipping PRICE: ONLY $549!!!	BGA TSOP programming for ViP722 IRD PRICE: $144.00 FREE CANADA SHIPPING
Buffered JTAG Programmer PRICE: $39.00	MaxMel Emulator PRICE: $59.00 FREE SHIPPING	SB5101 Diagnostics Modem PRICE: $149.00	ViP722 modded HDTV IRD Slinger ready Free Canada shipping PRICE: ONLY $649!!!	BGA TSOP programming for most IRDs PRICE: $124.00 FREE CANADA SHIPPING

07-28-2003	#1
ouxly40 Status: Wave Catcher Join Date: May 2003 Location: On the roof with a telescope looking for a bigger sat with even more channels Posts: 121	Model 1000 IRD A friend asked if i could have a look at his 1000 IRD. I have not seen it but i think it has no jtag port. is there one on the circuit board or do i have to find another route such as voltmeter method

07-28-2003	#4
ouxly40 Status: Wave Catcher Join Date: May 2003 Location: On the roof with a telescope looking for a bigger sat with even more channels Posts: 121	1000 of course the cam is locked. he already plugged it in and told me the rev #. and no i will not send it to a dealer. that is not even almost an option. no trails. besides i have plenty of open cards.

07-30-2003	#6
ouxly40 Status: Wave Catcher Join Date: May 2003 Location: On the roof with a telescope looking for a bigger sat with even more channels Posts: 121	1000 ok guys i guess i have been unclear. I know that the card is locked. he already read me the rev # from the sys info screen. Then he told me that it was subbed until last month. At that time i told him i would not be able to get b-keys from card and would he tell me what model it is. "1000" he says. I say "well I am not certain, but i think it has no jtag port. His unit has been in the stream, subbed, for years. i just wondered if i should tell him we need to look for another IRD for him.I apologize for not being clear as to what i needed. I need to jtag it or replace it.

07-30-2003	#8
ouxly40 Status: Wave Catcher Join Date: May 2003 Location: On the roof with a telescope looking for a bigger sat with even more channels Posts: 121	darnat thank you for a direct answer. that;s all i wanted was to know if it was taggable without going 115 miles to see for myself. Yes another ird is the answer. again thank you

07-28-2003	#2
Darnat Status: Guest Posts: n/a	There is no jtag on 1*,prefered method for retrieving boxkeys is to remove tsop and have it read by a dealer.....my opinion is that it's not worth the time or money,better to upgrade and go and get a 31.

07-28-2003	#3
Chapster99 Status: Guest Posts: n/a	The 1000 are older. If the CAM is original, chances are it's a ROM2 or ROM3. The boxkeys can be read off the CAM (if it's unlocked). If it's locked, send it to a dealer to be opened, then read the boxkeys.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)