Cid6.7's Rom3 Guide.

Cid6.7 · 03-03-2005

Hey Guy's & Gal's I myself have written a rom3 unlocking guide.
Take a look @ it & let me know how it is & if it helps anyone & if it needs anything..
Its a .doc file so you might need Microsoft Word.

**Crazy1_79** · 03-03-2005

LOL< I didn't call it Crazy1_79's modded loader how to guide, did I? I see you have to have your name in lights! Time for a bigger hat cid, and I am going to read this guide right now. I have a rom 3 that will not pop, never seen anything like it.

**Crazy1_79** · 03-03-2005

holy shit cid, where did you come up with the extra delays? I am back to work on this stubborn rom 3 , 16 plus hours and no poppy, changing the setting you little rom 3 unlocking guru you!

03-03-2005

Looks good to me. Great splainin in detail. Will go thru and do your way and see if it makes a difference on these rom3's I can't seem to unlock. I mess with the trim pot alot, I don't keep it at one setting 2.2. Each card I turn up or down untill I get a good ++++----- combo. So maybe messing with the vcc settings is the key, not the ohms. Thanks for your time in writing this guide

.

.

03-03-2005

Nice Cid, now get us a good one for those nasty little looped b*****s that are the bain of my sanity. I've given up on that breed.

03-03-2005

Looks great Cid. I think everyone has wanted to throw their modded loader accross the room dealing with Rom 3's at some point. I wish I had your guide when I first started out. It will definitely be helpful to many.

I have had more succes with unlockrom3.vxb than with powersync. I have found that my loader is fairly consistent as far as vcc, delay is another story. I have kept a log of every card 3 & 10 that I have unlocked, vcc is steady between 1E and 27, with the exception of the rom 3 I looped, it popped at vcc= 39. Thats out of about 40 cards. Set the pot at 2.2k, and have never moved it.

Cid6.7 · 03-03-2005

LOL Crazy no its not called Crazy's how to guide but everyone refers to it as that..lol
Hell yah i want my name plastered everywhere up in light's like a movie star..lmao
Yes I myself mostly only use unlockrom3.xvb Thats why I didnt add powersync to it might end up confusing those who need it..
Thanks guy's I hope it helps someone..!
If it needs anything let me know & I'll add it..I was going to add some pic's but didnt want the file size to big..

**Crazy1_79** · 03-03-2005

hey cid,......ummm, do you , you know,.......YAHOO?

**Crazy1_79** · 03-03-2005

where did you get the extra delays cid? Just from trial and error?

Cid6.7 · 03-03-2005

Oh I forgot something LOL
Some of you might be wondering what the Erasure is for...Its for cleaning the contact on the card..I'll add that later..lol
Ok I edited it a bit added how to use FlashXp aswell

03-03-2005

cid where can I get the vcc analyzer.xvb at? I couldn't find it in the files section, unless it is under a different name. I did a search and could not find it on here either in the forumns.

**Crazy1_79** · 03-03-2005

here you go virgo.

03-03-2005

Thank you Crazy1

Cid6.7 · 03-04-2005

I edited it a bit & added some Pic's hope you's like

**Crazy1_79** · 03-04-2005

cid, what settings do you use for unlooping? I finally got one of these rom 3's to pop, had to change my trim pot, I think it went to hell

**Crazy1_79** · 03-04-2005

and what are you around normal setting for unlocking rom 3's, gonna tackle this looped one while I am sleeping

tev1 · 03-08-2005

What is the D6-1 flash?????????Are you talking about the eeprom.hex?

03-08-2005

In PowerSync V2a there is a flash included called D6-1. Earlier version of newd6, don't know if there is any difference or not.

tev1 · 03-08-2005

Thank you. I will try that.

tev1 · 03-08-2005

Does anyone have this version? (PowerSync V2a)...I found every version but that one...

03-08-2005

Quote:

Originally Posted by tev1

Does anyone have this version? (PowerSync V2a)...I found every version but that one...

Here ya go.

05-10-2005

Geuss I must be blind, or the page is not loading properly but I cannot find the link to download the ROM 3 Guide.

I am also looking for powersync 2a and unlockrom3.vxb

Help???

Cid6.7 · 05-10-2005

Sorry I must have deleted it..
Cimba or someone who has it could you please upload it again...
I cant find it on my pc..lol

Found it

05-15-2005

Does anyone know where I can find the WinExplorer script "Unlockallver2a" or any script I can use to open my ROM3 card. In NagraEdit2.0 I get the error message, invalid ATR. Any help will be appreciated, thanks

Cid6.7 · 05-16-2005

It's most likely looped if it has no ATR

05-16-2005

Quote:

Originally Posted by medium

Does anyone know where I can find the WinExplorer script "Unlockallver2a" or any script I can use to open my ROM3 card. In NagraEdit2.0 I get the error message, invalid ATR. Any help will be appreciated, thanks

It's in the Sticky in this sub-forum, called PowerV2a. Just got tired of typing PowreSyncUnlockallV2a. If you are looped you might also want to try the Testunlooper program or Penga's R3.xvb(rom 3 unlocker-glitcher3)

ViP211 modded HDTV IRD Slinger ready Free shipping SALE PRICE: $349!!!	RomCode DishTV Subscription FROM: $69.00	Slinger IKS Kit FREE SHIPPING PRICE: ONLY $199!!! CLICK HERE FOR INSTRUCTIONS	ViP622 modded HDTV IRD Slinger ready Free Canada shipping PRICE: ONLY $549!!!	BGA TSOP programming for ViP722 IRD PRICE: $144.00 FREE CANADA SHIPPING
Buffered JTAG Programmer PRICE: $39.00	MaxMel Emulator PRICE: $59.00 FREE SHIPPING	SB5101 Diagnostics Modem PRICE: $149.00	ViP722 modded HDTV IRD Slinger ready Free Canada shipping PRICE: ONLY $649!!!	BGA TSOP programming for most IRDs PRICE: $124.00 FREE CANADA SHIPPING

03-03-2005	#1
Cid6.7 Status: Registered User Join Date: Jul 2004 Location: Over Here Posts: 844	Cid6.7's Rom3 Guide. Hey Guy's & Gal's I myself have written a rom3 unlocking guide. Take a look @ it & let me know how it is & if it helps anyone & if it needs anything.. Its a .doc file so you might need Microsoft Word. __________________ Too often we lose sight of lifes simple pleasures. Remember when someone annoys you it takes 42 muscles to frown, BUT it only takes 4 muscles to extend your arm and B^&$ slap that Mother %&#@! upside the head. Last edited by Cid6.7; 03-03-2005 at 03:32 AM..

03-03-2005	#2
Crazy1_79 Status: Cardkilla' Join Date: May 2004 Location: anything but 0000001 Posts: 5,519	LOL< I didn't call it Crazy1_79's modded loader how to guide, did I? I see you have to have your name in lights! Time for a bigger hat cid, and I am going to read this guide right now. I have a rom 3 that will not pop, never seen anything like it. __________________ Free TV is expensive!!!!! 6B697373206D7920617373206563686F73746172 PLEASE DO NOT PM WITH ME QUESTIONS, ASK IN THE FORUM SO OTHER CAN LEARN AND HELP TOO.

03-03-2005	#3
Crazy1_79 Status: Cardkilla' Join Date: May 2004 Location: anything but 0000001 Posts: 5,519	holy shit cid, where did you come up with the extra delays? I am back to work on this stubborn rom 3 , 16 plus hours and no poppy, changing the setting you little rom 3 unlocking guru you! __________________ Free TV is expensive!!!!! 6B697373206D7920617373206563686F73746172 PLEASE DO NOT PM WITH ME QUESTIONS, ASK IN THE FORUM SO OTHER CAN LEARN AND HELP TOO.

03-03-2005	#7
Cid6.7 Status: Registered User Join Date: Jul 2004 Location: Over Here Posts: 844	LOL Crazy no its not called Crazy's how to guide but everyone refers to it as that..lol Hell yah i want my name plastered everywhere up in light's like a movie star..lmao Yes I myself mostly only use unlockrom3.xvb Thats why I didnt add powersync to it might end up confusing those who need it.. Thanks guy's I hope it helps someone..! If it needs anything let me know & I'll add it..I was going to add some pic's but didnt want the file size to big.. __________________ Too often we lose sight of lifes simple pleasures. Remember when someone annoys you it takes 42 muscles to frown, BUT it only takes 4 muscles to extend your arm and B^&$ slap that Mother %&#@! upside the head.

03-03-2005	#4
VirgoVixen Status: Guest Posts: n/a	Looks good to me. Great splainin in detail. Will go thru and do your way and see if it makes a difference on these rom3's I can't seem to unlock. I mess with the trim pot alot, I don't keep it at one setting 2.2. Each card I turn up or down untill I get a good ++++----- combo. So maybe messing with the vcc settings is the key, not the ohms. Thanks for your time in writing this guide . .

03-03-2005	#5
Cimba Status: Guest Posts: n/a	Nice Cid, now get us a good one for those nasty little looped b*****s that are the bain of my sanity. I've given up on that breed.

03-03-2005	#6
blue_grass_tv Status: Guest Posts: n/a	Looks great Cid. I think everyone has wanted to throw their modded loader accross the room dealing with Rom 3's at some point. I wish I had your guide when I first started out. It will definitely be helpful to many. I have had more succes with unlockrom3.vxb than with powersync. I have found that my loader is fairly consistent as far as vcc, delay is another story. I have kept a log of every card 3 & 10 that I have unlocked, vcc is steady between 1E and 27, with the exception of the rom 3 I looped, it popped at vcc= 39. Thats out of about 40 cards. Set the pot at 2.2k, and have never moved it.

03-04-2005	#14
Cid6.7 Status: Registered User Join Date: Jul 2004 Location: Over Here Posts: 844	I edited it a bit & added some Pic's hope you's like __________________ Too often we lose sight of lifes simple pleasures. Remember when someone annoys you it takes 42 muscles to frown, BUT it only takes 4 muscles to extend your arm and B^&$ slap that Mother %&#@! upside the head.

03-08-2005	#17
tev1 Status: Registered User Join Date: Aug 2003 Posts: 29	What is the D6-1 flash?????????Are you talking about the eeprom.hex?

05-10-2005	#22
simpleton Status: Guest Posts: n/a	Looking for CID's Guide Geuss I must be blind, or the page is not loading properly but I cannot find the link to download the ROM 3 Guide. I am also looking for powersync 2a and unlockrom3.vxb Help???

05-15-2005	#24
medium Status: Guest Posts: n/a	Does anyone know where I can find the WinExplorer script "Unlockallver2a" or any script I can use to open my ROM3 card. In NagraEdit2.0 I get the error message, invalid ATR. Any help will be appreciated, thanks

05-16-2005	#25
Cid6.7 Status: Registered User Join Date: Jul 2004 Location: Over Here Posts: 844	It's most likely looped if it has no ATR __________________ Too often we lose sight of lifes simple pleasures. Remember when someone annoys you it takes 42 muscles to frown, BUT it only takes 4 muscles to extend your arm and B^&$ slap that Mother %&#@! upside the head.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)