[blocker]

I flashed it with the newd9 and opened up powersyncunlockerallver2 hit run script and get Executing Script: C:\WINDOWS\Desktop\unlocker\A24 -Rom10-autoOPEN.xvb
TX Data : A0
TX Data : A0
TX Data : A1
TX Data : 07 0E 03 10 01 03 9A 00
RX Data :

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script



Script Error on Line 84
Sc.GetByte: Requested Byte Exceeds Last Read Request

Did you set your WinExplorer 5.0 to the appropriate ones for running a modded loader and save them in the program parameters ?
Sometimes it helps also to uncheck the log transactions in the program settings in program parameters.
Sometimes you have to unplug your loader and replug to reset between tries.
What type of modded loader are you using, did you set the dipswitches for unlooping(if it has any) after you flashed ?

[blocker]

no i did not set the parameters i fill stupid now. i am using powersync and on the board it has 1 thru 4 clock setting 5-on to flash 6 thru 7 unused. i get this when i use powersync allver2 with 1-4 setting on my powersync Executing Script: C:\WINDOWS\Desktop\unlocker\PowersyncUnlockALLver2 b.XVB
________________Setting up WinExplorer_________________

Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 2 Bytes Read, Continuing Script
I get this if i just leave 5 on
Executing Script: C:\WINDOWS\Desktop\unlocker\powersyncUnlockRom3ver 1a.XVB
TX Data : A0
TX Data : A1
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 07 1B
RX Data : 3F FF 95 00 FF 91 81 71 64 47 00 44 4E 41 53 50
30 30 33 20 52 65 76 33 38
o00o00o00o00o00o00o00o00o00o00o00o00o00o00o00o00o0 0o00o00o00o00o00o00o00o00o00o00o00o00o00--- try to hit 0C bug at 10A5
o00o00o00o00o00o00o00o00o00o00o00o00o00o00o00o00o0 0o00o00o00o00o00o00o00o00o00o00o00o00o00o00--- try to hit 0C bug at 10A6
o00o00o00o00o00o00o00o00o00o00o00o00o00o

Again, what type of unlooper are you using ?
What rom of card ?
Do you get a valid ATR in Nagra Edit ?
In the glitching forum are 2 good instructionals, a Sticky by Crazy1 and another post by Cid .

[blocker]

i am using powersync unlooper rom3 and 10 cards and they do have atr. i just got this thing and really just dont know how to use it ,not as easy as the huunloopers where.

[robo]

use powersyncv3 put dip swtich 1 on and run it

[blocker]

all the cards i have are soft looped 3 rom3s and 2 rom 10s with atrs just cant get backdoors, i have power sync allver2 tried it on one card it siad cam open in a second,tried to read in nagra and get this Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 64 47 00 44 4E 41 53 50
30 30 33 20 52 65 76 33 38 31 F7
ROM Revision: 003
EEPROM Revision: Rev381
Logging into card
Checking for BackDoor
BackDoor appears to be open, continuing...
Retrieving BackDoor password
Error retrieving BackDoor password
Error reading image from card
Closing of COM1 was successful

[robo]

run mrom on the rom 10s

[robo]

theres scripts for a iso that should open a 381

[blocker]

i know but ,they are softlooped with bad programming and i thought that a modded looder would fix them.

Originally Posted by blocker

all the cards i have are soft looped 3 rom3s and 2 rom 10s with atrs just cant get backdoors, i have power sync allver2 tried it on one card it siad cam open in a second,tried to read in nagra and get this Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 64 47 00 44 4E 41 53 50
30 30 33 20 52 65 76 33 38 31 F7
ROM Revision: 003
EEPROM Revision: Rev381
Logging into card
Checking for BackDoor
BackDoor appears to be open, continuing...
Retrieving BackDoor password
Error retrieving BackDoor password
Error reading image from card
Closing of COM1 was successful

Try Penga's R3.xvb

[blocker]

i dont understand how do you get the vcc hi and lo and the delay and the limit what does the vcc analizer do. i thought i could just start playing around with it and figure it out but its harder than i thought it would be, becuase it dont understand it.

Originally Posted by blocker

i dont understand how do you get the vcc hi and lo and the delay and the limit what does the vcc analizer do. i thought i could just start playing around with it and figure it out but its harder than i thought it would be, becuase it dont understand it.

Have you read Crazy1's Sticky post in this forum ? It is well explained in there, also Cid6.7 has an excellent post on doing rom3's. I will attach both temporarily and remove again tomorrow night to keep server space clear.
The key is to read carefully, follow steps with the programs ready to go, and do exactly as told.

[blocker]

thanks ill read up and post my results thanks for the help.

It looks complicated but if you read and do at the same time it starts to get easier thanx to all the great programs and how-to's out there.

[blocker]

i have had no luck at popin any cards my bev card gives me this is this a good glitch-- Delay Start &h0f00
Delay Limit &h104f
VCC Start &h07
VCC Limit &ha1
TX Data : A0
TX Data : A1
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 07 1B
RX Data : 3F FF 95 00 FF 91 81 71 64 47 00 44 4E 41 53 50
30 30 33 20 52 65 76 33 38 o90o90o90o90o90o90o90o90o90o90o90o90o90o90o90o90o9 0o90o90o90o90o90o90o90o90o90o90o90o90o90--- try to hit 0C bug at 0F01
o90o90o90o90o90o90o90o90o90o90o90o90o90o90o90o90o9 0o90o90o90o90o90o90o90o90o90o90o90o90o9