[buzzharley]

All right my legacy dual quad lnb works just fine for my pansat2700a but with my twinhamm I can't get it to work-- No signal on any transponder? I have all the right plugins, MYT recognizes my twinhann. Any ideas-- I'll try the diseq switch tomorrow I guess!!!

Good Luck --- Legacy twin gave me nothing but a headache. Popped in a DPtwin and all is good with proper ini files. The switches in legacy's are wrong type.

[buzzharley]

Did you still you a diseq swith with the pro dual? Thanks

No buzz RG-6 straight from one f-connector off lnb to TwinHan

[buzzharley]

Thanks-- I'll hook up my dish pro tommorow and try it- Thanks-- Oh yeah on the twinhan1020a it has an out and in for the cable. SO in from dish- But what can I do with the out - Hook it up directly to my tv? or does it have to be hooked up to another reciever? Thanks for the help!!

The out is a pass thru as you guessed it goes to another receiver - tv out comes off vid card via s-vid or s-vid to svid convertor.

Good Luck

If you have issues come back and ask. If you give a good description of your setup the easier it will be to help. Thanks!

[buzzharley]

ALl right I don't want to hook up my dish pro yet because My pansat 2700a wont work with it. Right now I have my legacy dual quad hooked up directly to my twinhan 1020a -no switch at all. Then my twinhan out to the 2700a. The 2700 receives most of the channels just fine with good signals on echo 3, 7, 8,6. I'm using mytheatre 3.26 with the plugins (s2emu.dll, softCam.key, yankse.dll, yankse.ini) and mdplugins (KrasnalTM.dll) and in the my theatre directory i put keys.bin file! In the diseq settings I deleted all sats but the echo 7 and echo 6,8. Lof1-9750000, sw-11700000, lof2-11250000. Diseqc settings - first diseq switch I've tried committed, lnb1- uncomitted lnb2 and all diff combos of the 2. when I apply and scan I get nothing- When I scan I get

Sort Tranponders by polarization and band...
DiseqC Setup... Done.
1tp- 241 12224 V 20000: No signal
**Scan Done**

Do I need the 119 and 110 ini files? Do I just do Horizontal or vertical?
I have window XP prof
Directx9.0
1.5 ram
2.66 Ghz.

I'm lost- Once my diseq switch comes in I'll use my dish pro I guess. Are my settings wrong!! I'll try anything!! Thanks!!

[stich]

buzzharley i had a quad legacy i replaced it with disque switches and two seperate lnb. I decided last night to try the legacy quad now that i have everything running. coolsat 4000 pro worked and my vision plus twinhan 1020.
sei 119 at 1 & 110 at 2 all working.

Buzz

see this thread http://www.dssftp.com/forum/showthre...708#post288708 regarding what files are neccessary.

You need 110 & 119 .ini files (not modified) which will have both H & V Transponders

[buzzharley]

So you put your dual legacy back on with your diseq switch and it worked? Thanks.

[stich]

no disqeq switches internal inside quad and it works . Much better than having
the switches hanging it;s less work with the quad.