For those of you that need to know what Rom Cam you ave and what Rev it is at......
Dissconnect sat cable from your Ird,
Insert cam into cardslot,
Press System Info Button,
Scroll down to DNASP,
_ _ _ Rev_ _ _ will tell you what Rom & what Rev the cam is at,
Don't worry with the sat cable being off you cannot lock or damage the cam...now you have found this out,you may remove cam and re-connect Sat cable.
Done...Hope fully the Cam is Unlocked so you may proceed to Smartcard Programming...
Have Fun as this is what this Hobby is all about.

[jzoo]

Originally Posted by Darnat

For those of you that need to know what Rom Cam you ave and what Rev it is at......
Dissconnect sat cable from your Ird,
Insert cam into cardslot,
Press System Info Button,
Scroll down to DNASP,
_ _ _ Rev_ _ _ will tell you what Rom & what Rev the cam is at,
Don't worry with the sat cable being off you cannot lock or damage the cam...now you have found this out,you may remove cam and re-connect Sat cable.
Done...Hope fully the Cam is Unlocked so you may proceed to Smartcard Programming...
Have Fun as this is what this Hobby is all about.

If the rom 3 is at rev 381, then it is locked? If so can it be unlocked with software and an ISO programmer? I read it may need to be sent to a dealer? like who? and what is the cost? can i test with a model 1000 reciever? I read it does not have a jtap port.... how do ya get the box keys? thnx a bunch !

[lips905]

i can unlock up to rev 383 (no bull)

Hi guys - Any idea what rom it is if my cam said Rev 240?

Rom 2 or Rom 11

[jzoo]

Originally Posted by lips905

i can unlock up to rev 383 (no bull)

Well can you please share how ?

I Believe Its Rom 102

Originally Posted by lips905

i can unlock up to rev 383 (no bull)

What software did you use to unlock REv 383? How????