[mili]

DIshNet updated 5 recievers' TSOP firmware tonight. As far as the AVR-X cards go the 4900s stopped working. The AVR-X man is working on that angle and will have it solved tomorrow. They just have the 501 and 6000 to go. When they finish with those expect some merde hit the fan.

mili

[reco]

Originally Posted by mili

DIshNet updated 5 recievers' TSOP firmware tonight. As far as the AVR-X cards go the 4900s stopped working. The AVR-X man is working on that angle and will have it solved tomorrow. They just have the 501 and 6000 to go. When they finish with those expect some merde hit the fan.
mili

my 4700 stoped working tonight - all i get is wrong card

[mili]

47 49 same thing xcept like 5 parts that add DD.

mili

updates have been in the stream for more then a week now and the only receiver not updating at this time is the 50x series....
should get interesting around here very soon....
jm 2 cents

[shvlhed]

Link to latest software versions chart:

http://www.dishnetwork.com/content/c...ions/index.asp

[dank]

WHAT DOES THIS MEAN ---merde hit the fan.

Originally Posted by dank

WHAT DOES THIS MEAN ---merde hit the fan.

basically it means the chit will hit the fan... most likely taking out fta and rom 101.... thats jmo.. only time will tell

i dont think theyve got 101s completely swapped yet

even if they do, they can go the bev route of a 102

taking out FTA is more likely. its quite possible bev/charlie could be hitting on FTA every few days

Been getting update nags on 301.10 for a week but no forced update ... yet

[Bandit5906]

Originally Posted by theoldpirate

Been getting update nags on 301.10 for a week but no forced update ... yet

As of this morning I have not seen an update nag for either the 301.010 or the 301.013. The 301.010 is already at P344 and are working fine with version 1.09a.

I am running x-1.08 and P-243

[Baby Jaguar]

my 5100 w/102 has been bugging me for 2 weeks to update it. I havent done it yet, is it safe to take it?

[JT]

Only accept updates if something isn't working properly already.

[Baby Jaguar]

thanks for the clarification. Everything is working flawlessly

[ronski]

I recently let my 301.10 update itself to 244. Working just fine with my R 101 !

[michaellana]

Is it possible it's just an updated firmware for the 4900? My 1rd was updated by charlie, so I saved the new ird flash (P321 CCJD N) and wrote the old flash (P320 CCJD) back to the ird with all the dt08 info on it. it seems to work fine for now. Perhaps the new flash just needs the dto8 info added and it will stop trying to update? Has anyone tried this or does the new flash negate this option?

[mruk69]

It can sometimes take upto 2 weeks before you get nagged for an update, as they so it in a series.

[michaellana]

OK..I just used Gen DT08 v 2.3 and changed the info on the P321 ird flash and the 4900 with rom 102 is running currently. All seems ok for now.

[lauzon]

My 6000 Dish freeses ever 20 seconds, will the software fix take care of this?

[michaellana]

I am not sure. I am using a 4900 with a virgin 102. (No 0A) I had to create my own dt0A patch for the ird and card using my own numbers. Write the new flash to the ird, then take a 3m, apply tiers, apply penga's 22sk blocker with the new new P. and Q. (Byte flopped) and then the dt08 patch. it's still working.

[michaellana]

I,m pretty sure you could follow the same process with your 6000 if yoiu're using a 102, although i think you'll need to create session keys instead of dtoa. Ill upload the gendtoa sk 2.3 utility to the file section.

[OverEasy]

michaellana did you let your 4900 update before you wrote the old flash P320 ?

[lauzon]

I have a 6000 Dish using AVR-X that freezes ever 20 seconds, will the new software fix take care of that? Using .019 software . I get guide and video.

[Bandit5906]

What software are you using: 1.08, 1.09, or 1.09a? I would like to think you should be using 1.09a and the default keys supplied w/o any changes. It should fix all your problems.

[lauzon]

I am using 1.09 amd the default keys supplied for the Dish 6000. I Did try the 1.09a today, still freezing. Is there any other possibility? I will work with the 1.09a again tomorrow. .. thanks

[Bandit5906]

You could substitute "0320 8000" for 0334/03D1 and that should help with the freezing.

08FC/0A82 - AT180

0258/0294 - AT120

0001/002D - AT60

0050/00FA – Movies

0334/03D1 - Audio/Music/Plby

003C/0043 - East/West Networks

0190/01C6 - Foxsports

02BC/02EE - Superstation/Outdoor channel

Here is the tiers and what they cover. I did not include the first set of tiers, but they are for HDTV and only for the 6000 I think.

[JT]

1.09a is just for the model 301.10 isn't it?

[Bandit5906]

Originally Posted by JT

1.09a is just for the model 301.10 isn't it?

AVR-X: OFFICIAL SOFTWARE RELEASE - 1.09a - Feb. 03, 2006

What is NEW?

Bev expirations have been updated. Dish 6000 model fixed.

Autoroll has been implemented for Dishnetwork models: 2800, 3900, 4900, 301.013, 501, 508, 510
Autoroll code will be added for the remaining models and for ExpressVu in about a week.

019 errors and rebooting problems have also been addressed.

-------------------------------------------------------------


Version 1.09a:

Dish Platform Support

-2700/2800/3700 (8.51P, 8.53P) - AUTOROLL
-301.010 (P2.44)
-301.013 (P2.08, P2.09) - AUTOROLL
-3800/3900 (P2.36) - AUTOROLL
-4700/4900 (P3.20) - AUTOROLL
-501/508/510 (P3.04) - AUTOROLL
-6000 (P8.29)

ExpressVu Platform Support

-2700/2800/ (E509)
-301.010 (E537)
-501/508 (E548)
-6000 (E531)

[JT]

Version 1.0.9a is just for the model 301.10/3100. The read me is identical in both read me files for the 1.0.9 software.

C/P from AVR-X.com
Fix for tier expiration - Dish and BEV. Dish 6000 also fixed. Use version 1.09a if you have a Dish 301.010 @ 244 firmware. This software release SHOULD fix ALL 019 problems. Please post feedback on this issue in the forums. We would like to resolve this issue before fully implementing the autoroll code on ALL receiver models. AVR-X autoroll NOT affected by latest FTA ECM! Enjoy!

[Bandit5906]

Originally Posted by Bandit5906

As of this morning I have not seen an update nag for either the 301.010 or the 301.013. The 301.010 is already at P244 and are working fine with version 1.09a.

I see the Dish web site is saying that there is a new firmware (P3.41, P2.46) for the 301 IRD, but so far I have not gotten any nag for either firmware. The release date is 02/16/06, btw.

Which is for the 301.010 and 301.013? When will they take effect: any thoughts?