[mili]

THey are getting ready for March 9th, 301 formware got updated as seen on http://tech.dishnetwork.com/departme...iver/301.shtml

BEV rolled keys look for them in the forum please.

mili

[Bandit5906]

Complete current firmware:


http://www.dishnetwork.com/content/c...ions/index.asp

[maltaman50]

I was wondering if anyone has this problem I get error 120 "you can not recieve this channel outside the designated viewing area" also what is the March 9th day supposed to mean if I have the 2.02 software.

[Bandit5906]

March 9th is the date set by Dish where the PPV channels will require that you have the latest firmware installed on you IRD.

As far as I am aware the only IRD that supports the latest firmware upgrade is the 301.013, but I may be wrong on that issue. I just haven't seen anyone post that they have the software upgrade and the AVR-X software suppports that upgrade though.

Anyone who has upgraded their firmware and the AVR-X has worked with it please post so we will know what is safe to accept.

[woods]

took p3.41 on my 301.13dual running on a rom102 and didnt skip a beat. using sk mod. dont have an avrx working on this box to test. if i get time ill give it a try.

woods

[barmor]

Hi. Running 202 on 301-013 single Ttp, Firmware 341, Took update and doing fine, a few reboots, missing few ch. 841 and around the same ch. no biggy. Working good.

[Bandit5906]

Woods

I am given to believe that the 301.013 works with the latest firmware and the AVR-X, but I don't know if any others are. I do know the 301.010 will not work with P2.46 or at least not for me.

[shawji]

Here are the new keys for Nagravision line 10 & Line 11 that have been changed but I changed to new key numbers it worked for 5-10 minutes. Is there anyone who can help as when I entered on my Coolsat 5000 Platinum new key numbers & I saved it but after saving the FTA worked about eight minutes & then went back to original setting. I could not find AUTOROLL BUTTON as that one should be off.

Super Secret Key TYPE 8282 on your coolsat 5000 PLATINUM RECEIVER

NOW ON TOP LEFT CORNER YOU WILL SEE BOXES NUMBERS 1 TO 200 JUST SELECT BOX #1 & bOX #2 FOR CAS NAGRAVISION
IDENT DISHNETWORK {0001}

NOW TYPE FOR BOX #10 9E 5B 7 A 77 C0 FE 91 CA

NOW TYPE FOR BOX #11 4D 2A DC 33 D4 CD E3 75

PLEASE MAKE SURE DO NOT CHANGE THE FOLLOWING NUMBERS AS IT STAYS SAME

LINE 20 42 00 10 46 08 00 10 C5

LINE 21 6C 88 89 3A 32 D0 C9 24

IF ANYBODY HAS MORE NEWS THEN POST IT HERE AS IT WILL HELP SOMEBODY. PLEASE MAKE SURE THE AUTOROLL BUTTON MUST BE OFF & THESE NUMBERS MUST BE ENTERED MANUALLY WITH YOUR REMOTE CONTROL ONLY.

[v10]

i have a dp 301.13 and i was watchin all the chanels ok then when i went to change the satellite from where it was to a larger place to see the fight in ppv with friends it didnt turn on againg and it never did. what could be the problem? it is not the fuse i cheked for continuity PLEASE HELP!!

[bunroath]

mY 4900 HAVE BLACK SCREEN THIS MORNING

[Bandit5906]

Originally Posted by bunroath

mY 4900 HAVE BLACK SCREEN THIS MORNING

There has been a key change and the new keys are posted in the key change thread.

[bunroath]

Bandi,6000 Did you thing I need special LNB to get HD singnal?

[Bandit5906]

Using the standard DP500 which is what they installed when they set-up my original 811.

[Bandit5906]

Originally Posted by v10

i have a dp 301.13 and i was watchin all the chanels ok then when i went to change the satellite from where it was to a larger place to see the fight in ppv with friends it didnt turn on againg and it never did. what could be the problem? it is not the fuse i cheked for continuity PLEASE HELP!!

What were the symptoms? Black screen? Did you get an error message and what was the message?

[bunroath]

My 4900 Picture Come Back After Pull The Card Out And Put It Back:d

[HCCAfan]

Originally Posted by Bandit5906

March 9th is the date set by Dish where the PPV channels will require that you have the latest firmware installed on you IRD.

march 10th here.......still watching ppv

[Bandit5906]

I believe that Dish has changed the cut-off date until towards the end of this month. They posted it in either their customer support or mail: I don't remember which one it was and they did not go into detail as to why they have updated the date either.

I have looked on other sites to try to get more information, but there has been none to post.