[mili]

BEV idiots removed their ECM but Dish is on the roll. Once I got specifics it will be posted.

mili

[hacker]

all of my rom 102 cards say you do not have authorization to view this channel etc. was i hit with ecm or do i need to update my keys? I am using the v23 blocker. thanks

[cojones]

It's now time for all good DISH subed custermers to start calling Dish and start winning about not having tv!

[mili]

They are up to some serious shit. Bev removed last weeks ECM to upgrade the firmware that will enforce the session key stuff and then put last week's ECM back in the stream. Probably not enough bandwidth for everythign to come down simulataneously or they just can'f afforf to hammer subs with all these updates simulataneously.

DishNet has changed the keyroll algorythm and rolled the keys.
Use these below:

Ikey0: E870B00A8E0A3DC5F359C35F1ADA195C

Ikey1: 719C607104C139AE88FFF05ED24CF3FC

mili

[willham]

what is the best way to change the key's on a rom 102 . I never han to do that before

[mili]

Please open a new discussion on that subject in the apropriate forum.

mili

[ra8844]

Hi Milli, what about Romcode. It sounds like not only there was a key change but also keyroll algorithm. Any chance you speak to them regarding an update?

[mili]

Will ask.

Newest working ROM102 Penga blocker V22 is on http://dssftp.com/files/index.php?m=category&CATID=46

mili

[JT]

Actually, it's not even an ECM. It's nothing more than a simple key change. Catch is to grab it you have to have current map functions enabled, and the current public blockers don't allow it. This is good in most ways of thinking about it. The new blocker should take care of it. Let's hope we don't let in the riff raff when we open the door so to speak.

[Crazy1_79]

always a chance, I'm running a char**e w/o a blocker right now. I wanna see this rev 108 and then I wanna get back into it. so if there is any other bullshit in the stream right now. I'll let ya know.

How to correct my situation? I have Coolsat 5000 and using 1.19 right now. This AM I had all my channels. Came back from work and they are all gone. What to do?

[LEEZA]

Originally Posted by mspy

How to correct my situation? I have Coolsat 5000 and using 1.19 right now. This AM I had all my channels. Came back from work and they are all gone. What to do?

Turn off auto roll for dishn** and manually put in the new keys found on the front page of the site.You do so by pressing channel 8282 and using the # pad for numbers and the info button to enter letters.Works for dishn** only,no fix for b3v as of yet.

[edieedie]

it may be my computer, but i can not get into 3 of the busyest site and one has a message that makes no sence at all

may be they are overloaded with this key roll, dont know but i cannot get into any of them

thanks very much!

[LEEZA]

Spoke a little too soon about b3v,seems like if you let the keys roll, all channels are back open,for how long I do not know,but everything is open as of 1:20AM eastern time.Enjoy your porn while it lasts boys !!

[JT]

uh. thanks

[JT]

Originally Posted by Crazy1_79

always a chance, I'm running a char**e w/o a blocker right now. I wanna see this rev 108 and then I wanna get back into it. so if there is any other bullshit in the stream right now. I'll let ya know.

Thanks Crazy. Chances are I'll know whats up before you have an oppertunity to fill me in. Keep it real bro.

[werks]

Originally Posted by mili

They are up to some serious shit. Bev removed last weeks ECM to upgrade the firmware that will enforce the session key stuff and then put last week's ECM back in the stream. Probably not enough bandwidth for everythign to come down simulataneously or they just can'f afforf to hammer subs with all these updates simulataneously.

DishNet has changed the keyroll algorythm and rolled the keys.
Use these below:

Ikey0: E870B00A8E0A3DC5F359C35F1ADA195C

Ikey1: 719C607104C139AE88FFF05ED24CF3FC

mili

Did that...no worky (ROM 102)...still get "not authorized" BS!

[mili]

DishNet is working with new keys, the ROMCODE guys updated their software so it rolls now. Be prepared for a very bumpy June.

mili

[Hyperion]

Mili, do I understand you correctly - did you issue suggestions to NOT use blocker for 311 and 811 units?

[mili]

Do not use the ROMCODE private blocker. Use Penga's V22.

mili

[studmonkey76]

why cant we use the romcode private blocker?

Originally Posted by mili

Do not use the ROMCODE private blocker. Use Penga's V22.

mili

Hum i mmight be in the wrong thread but i believe that Keys are not rolling on Charlie as of right now. Corect me if i wrong.

[JT]

There is a new version of the V22 Penga blocker that is working great so far. Thanks Penga! Other issues going on for sure, but the latest blocker is working great so far. Like Mili said in another thread, prepare for a bumpy June.

[mili]

Because Romcode says we can't.

mili

[studmonkey76]

is thier a reason why not to use the romcode software? if something was wrong, why dont they have something on thier home page, saying not to use it right now? they had an update around noon today CST. is this new update the problem or was last nites update a problem?

You rock Mili,im just sorry that people cant be patient with you and show some respect that is gratefully earned to you. i wait till you post your codes and do have respect for your work here. best regards Kopey

[studmonkey76]

i respect mili as well... any new info on romcode mili? if they dont want us to use it now, whats the problem? when will there be an update to fix thier problem if there is one?

[1one]

Originally Posted by JT

Actually, it's not even an ECM. It's nothing more than a simple key change. Catch is to grab it you have to have current map functions enabled, and the current public blockers don't allow it. This is good in most ways of thinking about it. The new blocker should take care of it. Let's hope we don't let in the riff raff when we open the door so to speak.

So if I understand correctly JT. Nagra2 stream with key change EMM packets and that extra small string that appears to be a shorter ECM string is in fact not an ECM at all. It is a remap to where? Could it not be smaller string with no tsop corrupts? Them not wanting to kill their cardless and all? I still cannot find where that code is going to. Or are you indeed saying it is somehow going to data? Any help would be appreciated.

[1one]

My post after re reading it confuses even me. This seems to be the most common theory.
Providers can open the front door and walk thru. We come in the backdoor. They change revisions of cards so autoroll will not work.This also adds some form of glitch resistance. Then they change keys to kill video. We in turn use our backdoor to spoof rev. and change keys. Gives us back our tv. We want to know what else they are doing while they are in there. Some people beleive they are being neferious. Some people just want more options from their mapping routine. All want to know if they can just kill it all together.