Has anyone used the Invacom Quad LNBF? It supposed to have Circular and Linear polarity with 4 outputs.

[missey]

My opinion, best thing since sliced bread and it's the answer if your using a motor. I feel it's well worth the extra bucks but don't look for and large gains in signal strength over the standard circular and liner lnb's ( dish and SC.)

Great LNB !! does eveything I need and then some !

Great! I am ordering one.

Since you brought up motors, I have PanSat 2700A. what motor would you recommend for a 30" Winegard?

Thanks again

[odysseyv]

30" dish will work for some fta sats but if you want a better signal go with a 36" dish or bigger, the bigger the dish is will bring in the weaker sat signals, so bottom line bigger is better, just make sure your motor can handle it

From what I have read I bought a 2100. There is a great post by Crow that details the construction methods of the motors. I think its a sticky in this section. That may help you decided what to buy.
I have a 33" and it works just fine. No signal issues at all.

[ustasa]

Works great with motor and 3500s.

[nobody]

Yes, the Invacom is a great little LNBF. But, there warantee policy is a problem.
They only honor and authorize RMA's from their authorized dealer list. If you have trouble with one you bought off Ebay, tough luck bub.

[DertyDevil]

Works grate with my viewsat and my 31 inch dish. Worth the extra bucks.
Have mine for over a year and never gave me any problems.
knok on wood...

[nevwar]

has anyone use this lnb for AMC16 sat. - international channels ? .
try it & report the findings . you are very much appreciated by all who reads here .
installation setup required .
standard @ 10750 ; universal 1 or universal 2 ?
stongest TP # @ 26000 ? . THANKS !

[videobruce]

Originally Posted by missey

My opinion, best thing since sliced bread and it's the answer if your using a motor. I feel it's well worth the extra bucks but don't look for and large gains in signal strength over the standard circular and liner lnb's ( dish and SC.)

Agreed!
It costs a little more, but if you factor in that one large dish replaces two or three smaller dishes with 1 or 2 less LNBFs' and 1 less switch it's well worth it.

Just be sure you have a good mounting arm for the LNBF since it is very heavy!