[fibrechunk]

A coworker gave me a couple 322s....looked at them to see they are rev382. I took chip off and mounted on interface card...and hooked up card slot reader on ird. Good ATR and ready to try and glitch now.

Thats the problem I don't want to loop chip. I have nexus organge 4053 unlocker. Would kind of like to try dumper but haven't ran it before. Not sure on what settings (unlooper2???) or ohms I should put unlocker. And is the 102 dumper work on 103?? Is nd13 right script???


Any help would be nice.

[fibrechunk]

RX Data : 76 08
RX Data : 12 00 04 84 00 90 00 02
TX Data : 16 15 60 0B 21 00 08 A0 CA 00 00 02 15 00 86 D2
20 03 40 06 50 05 00
RX Data : 16 06
RX Data : 12 40 02 6F 00 3F
TX Data : A1
===========================================
Glitch Success!! A0FF-INTERCEPT IS ON
BootLoader 6F 00 RSP Received!!
VCC = 03 (~5.88235294117647E-02 vdc)
Glitch Delay = 0340
Glitch type 06
===========================================
Script D:\322\103\Final Intercept 103 FM .xvb Transmission Completed



Never mind took a chance and let it run with final interceptor......11 ohms (2 & 5 down)