[cocoma]

Can anybody unloock one of this receiver and actually make it work?

It does have hard drive of
250 giga of memory
and two tuners

[lionman]

have a 522 that i want to test with but was trying to find a picture or howto like the one for the 322. Is there one available for the 522?

[mopar611]

Originally Posted by cocoma

Can anybody unloock one of this receiver and actually make it work?

It does have hard drive of
250 giga of memory
and two tuners

No, not yet.. The rev is to high to glitch into for now.. But might be able to
soon I hope..

Mopar

[mopar611]

Originally Posted by lionman

have a 522 that i want to test with but was trying to find a picture or howto like the one for the 322. Is there one available for the 522?

I know there is a how to for the 522.. But I have never read it..

Mopar

[Cristian]

Sorry to mis quote you mopar but it is glitchaeble and does work but really hard to pop but they do. I have a 625dvr at rev387 took the bga out and put it on a old rom10 card already wanst able to pop it myself but getting good results while glitching I know a memeber here who has claimed he has open alot up to rev388 so there workable...... Also at rom10x alot have open them as well so its no lie... Goodluck with it and read alot before you do anything hardest thing to do in my part was to pull BGA 103.lol
Oh yeah forgot to say ppl who have had luck with these high revs up to rev388 is with rebelserf 103_rev307_387 unlocker_reader_newdrs

[cocoma]

Originally Posted by Cristian

Sorry to mis quote you mopar but it is glitchaeble and does work but really hard to pop but they do. I have a 625dvr at rev387 took the bga out and put it on a old rom10 card already wanst able to pop it myself but getting good results while glitching I know a memeber here who has claimed he has open alot up to rev388 so there workable...... Also at rom10x alot have open them as well so its no lie... Goodluck with it and read alot before you do anything hardest thing to do in my part was to pull BGA 103.lol
Oh yeah forgot to say ppl who have had luck with these high revs up to rev388 is with rebelserf 103_rev307_387 unlocker_reader_newdrs

Cristian? is the BGA (chip) mark U32 ??? or U 28
Now the other qestion is: when you take it out will it work for two receivers?
I mean: I want to know if you use it on the same receiver you take out of it?

[Cristian]

No the rom103rev387 chip is a little black square chip around there by cardslot to the left if you look at very close you will see were it says 103 on it ...... And yes you will be able to watch it in two tv or have it so you can picture and picture that the way I will have it once i get it all set up....Sorry about that YES U32 thats the one..... Now this will be the hard part read alot before you do anything.... reading at rom10x will help out they have alot of info about these cardless irds...

[cocoma]

Originally Posted by Cristian

No the rom103rev387 chip is a little black square chip around there by cardslot to the left if you look at very close you will see were it says 103 on it ...... And yes you will be able to watch it in two tv or have it so you can picture and picture that the way I will have it once i get it all set up....Sorry about that YES U32 thats the one..... Now this will be the hard part read alot before you do anything.... reading at rom10x will help out they have alot of info about these cardless irds...

Thanks Cristian and to all of you guys for the help.

yes they can be unlocked and work great.... the 625 is pretty tricky you will have to remove the bga and mount on bootloader or equ.(or rom 10...cristian) then activate the card slot... and yes rom10x is a great place to read

[ripster]

Hey Cristian,
Do you have a "how to" for mounting BGA on a rom 10?

[Cristian]

yes hxxp://www.imageuploads.net/ims/pic.php?u=12856wdSFX&i=95716
change xx-tt....... Be very carefull on glitching these they loop very fast try at 215ohm firts then go to 700ohm...